OQT350-R201-EP-IO-V3-L Pepperl + Fuchs Electronic Components

Product Details

• Beam divergence
  > 5 mrad, d63 < 2,8 mm in the range of 350 mm ... 800 mm
• Diameter of the light spot
  approx. 3 mm at a distance of 350 mm
• Protection class
  III
• Switching type
  The default setting is: C/Q - Pin4: NPN normally open, PNP normally closed, IO-Link,
• Housing depth
  41.7 mm
• Detection range max.
  40 ... 400 mm
• Pulse length
  5.5 µs
• Control elements
  Teach-In key
• Device ID
  0x111812 (1120274)
• Switching current
  max. 100 mA , resistive load
• FDA approval
  IEC 60825-1:2014 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
• Housing
  PC (Polycarbonate)
• Light source
  laser diode
• Repetition rate
  approx. 2.4 kHz
• Mission Time (TM)
  20 a
• Transfer rate
  COM2 (38.4 kBit/s)
• Voltage drop
  ≤ 1.5 V DC
• Ambient temperature
  -40 ... 60 °C (-40 ... 140 °F),
• Light type
  modulated visible red light
• Black-white difference (6 %/90 %)
  < 2 %, ,
Diagnostic Coverage (DC)
0 %
Device profile
Identification and diagnosis, Smart Sensor type 0
Switching voltage
max. 30 V DC
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Optical face
PMMA
Laser class
1
Opening angle
approx. 0.3 °
Function indicator
LED yellow: constantly on - switch output active, constantly off - switch output inactive
Compatible master port type
A
Product standard
EN 60947-5-2
Degree of protection
IP67 / IP69 / IP69K
Adjustment range
100 ... 350 mm
MTTFd
560 a
Ripple
max. 10 %
SIO mode support
yes
Switching frequency
217 Hz
Housing width
15 mm
Note
LASER LIGHT , DO NOT STARE INTO BEAM
Wave length
680 nm
Operating voltage
10 ... 30 V DC
Min. cycle time
2.3 ms
Usage category
DC-12 and DC-13
Housing height
61.7 mm
Detection range min.
60 ... 100 mm
Ambient light limit
EN 60947-5-2 : 45000 Lux
IO-Link revision
1.1
Communication interface
IEC 61131-9
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Reference target
standard white, 100 mm x 100 mm
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
Interface type
IO-Link ( via C/Q = pin 4 )
Signal output
1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected, overvoltage protected
Laser safety
EN 60825-1:2014
Connection
Connector plug, M8 x 1, 3 pin, rotatable by 90°
Detection range
60 ... 350 mm
max. pulse energy
< 40 nJ
No-load supply current
< 16 mA at 24 V supply voltage
Process data width
Process data input 2 Bit, Process data output 2 Bit
Response time
2.3 ms
CCC approval
CCC approval / marking not required for products rated ≤36 V
Mass
approx. 44 g

OQT350-R201-EP-IO-V3-L Related Documents