OQT350-R201-2EP-IO-0,3M-V1-L Pepperl + Fuchs Electronic Components

Product Details

• Detection range max.
  40 ... 400 mm
• Diagnostic Coverage (DC)
  0 %
• Ripple
  max. 10 %
• Process data width
  Process data input 2 Bit, Process data output 2 Bit
• Communication interface
  IEC 61131-9
• Housing height
  61.7 mm
• Detection range
  60 ... 350 mm
• Function indicator
  LED yellow: constantly on - switch output active, constantly off - switch output inactive
• IO-Link revision
  1.1
• Voltage drop
  ≤ 1.5 V DC
• Housing width
  15 mm
• Degree of protection
  IP67 / IP69 / IP69K
• Note
  LASER LIGHT , DO NOT STARE INTO BEAM
• max. pulse energy
  < 40 nJ
• Opening angle
  approx. 0.3 °
• Min. cycle time
  2.3 ms
• SIO mode support
  yes
• Response time
  2.3 ms
• Housing depth
  41.7 mm
• Wave length
  680 nm
MTTFd
560 a
Protection class
III
Switching voltage
max. 30 V DC
Laser class
1
Light type
modulated visible red light
Ambient light limit
EN 60947-5-2 : 45000 Lux
No-load supply current
< 16 mA at 24 V supply voltage
Usage category
DC-12 and DC-13
FDA approval
IEC 60825-1:2014 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Connection
300 mm fixed cable with M12 x 1, 4-pin connector
Adjustment range
100 ... 350 mm
Black-white difference (6 %/90 %)
< 2 %, ,
Transfer rate
COM2 (38.4 kBit/s)
Switching frequency
217 Hz
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Detection range min.
60 ... 100 mm
Pulse length
5.5 µs
Diameter of the light spot
approx. 3 mm at a distance of 350 mm
Mission Time (TM)
20 a
Operating voltage
10 ... 30 V DC
Device ID
0x111812 (1120274)
Signal output
2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Switching type
The default setting is: C/Q - Pin4: NPN normally open, PNP normally closed, IO-Link, Q2 - Pin2: NPN normally-open, PNP normally-closed
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Laser safety
EN 60825-1:2014
Mass
approx. 55 g
Optical face
PMMA
Reference target
standard white, 100 mm x 100 mm
Beam divergence
> 5 mrad, d63 < 2,8 mm in the range of 350 mm ... 800 mm
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
Interface type
IO-Link ( via C/Q = pin 4 )
Compatible master port type
A
CCC approval
CCC approval / marking not required for products rated ≤36 V
Product standard
EN 60947-5-2
Housing
PC (Polycarbonate)
Light source
laser diode
Repetition rate
approx. 2.4 kHz
Control elements
Teach-In key
Device profile
Identification and diagnosis, Smart Sensor type 0
Switching current
max. 100 mA , resistive load
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F) , fixed cable, -20 ... 60 °C (-4 ... 140 °F) , movable cable not appropriate for conveyor chains
Cable length
0.3 m

OQT350-R201-2EP-IO-0,3M-V1-L Related Documents