OQT350-R201-2EP-IO-V1-L Pepperl + Fuchs Electronic Components

Product Details

• Ambient light limit
  EN 60947-5-2 : 45000 Lux
• Function indicator
  LED yellow: constantly on - switch output active, constantly off - switch output inactive
• Light source
  laser diode
• SIO mode support
  yes
• Response time
  2.3 ms
• Housing depth
  41.7 mm
• Connection
  4-pin, M12 x 1 connector, 90° rotatable
• IO-Link revision
  1.1
• Switching frequency
  217 Hz
• Housing width
  15 mm
• Wave length
  680 nm
• MTTFd
  560 a
• Ripple
  max. 10 %
• Min. cycle time
  2.3 ms
• Voltage drop
  ≤ 1.5 V DC
• CCC approval
  CCC approval / marking not required for products rated ≤36 V
• Beam divergence
  > 5 mrad, d63 < 2,8 mm in the range of 350 mm ... 800 mm
• Detection range min.
  60 ... 100 mm
• Reference target
  standard white, 100 mm x 100 mm
• Device profile
  Identification and diagnosis, Smart Sensor type 0
Switching voltage
max. 30 V DC
Laser safety
EN 60825-1:2014
Degree of protection
IP67 / IP69 / IP69K
Pulse length
5.5 µs
Detection range max.
40 ... 400 mm
Protection class
III
Transfer rate
COM2 (38.4 kBit/s)
Usage category
DC-12 and DC-13
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Mass
approx. 47 g
Repetition rate
approx. 2.4 kHz
Diagnostic Coverage (DC)
0 %
No-load supply current
< 16 mA at 24 V supply voltage
Compatible master port type
A
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F),
Optical face
PMMA
Detection range
60 ... 350 mm
Mission Time (TM)
20 a
Operating voltage
10 ... 30 V DC
Device ID
0x111812 (1120274)
Switching current
max. 100 mA , resistive load
Product standard
EN 60947-5-2
Housing
PC (Polycarbonate)
Black-white difference (6 %/90 %)
< 2 %, ,
Adjustment range
100 ... 350 mm
Note
LASER LIGHT , DO NOT STARE INTO BEAM
Switching type
The default setting is: C/Q - Pin4: NPN normally open, PNP normally closed, IO-Link, Q2 - Pin2: NPN normally-open, PNP normally-closed
FDA approval
IEC 60825-1:2014 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
max. pulse energy
< 40 nJ
Control elements
Teach-In key
Light type
modulated visible red light
Signal output
2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Diameter of the light spot
approx. 3 mm at a distance of 350 mm
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
Interface type
IO-Link ( via C/Q = pin 4 )
Process data width
Process data input 2 Bit, Process data output 2 Bit
Communication interface
IEC 61131-9
Housing height
61.7 mm
Opening angle
approx. 0.3 °
Laser class
1

OQT350-R201-2EP-IO-V1-L Related Documents