OQT350-R201-2EP-IO-L Pepperl + Fuchs Electronic Components

Product Details

• Reference target
  standard white, 100 mm x 100 mm
• Diameter of the light spot
  approx. 3 mm at a distance of 350 mm
• No-load supply current
  < 16 mA at 24 V supply voltage
• Process data width
  Process data input 2 Bit, Process data output 2 Bit
• Communication interface
  IEC 61131-9
• Housing depth
  41.7 mm
• Adjustment range
  100 ... 350 mm
• Pulse length
  5.5 µs
• Diagnostic Coverage (DC)
  0 %
• Compatible master port type
  A
• Laser safety
  EN 60825-1:2014
• Housing height
  61.7 mm
• Light type
  modulated visible red light
• Beam divergence
  > 5 mrad, d63 < 2,8 mm in the range of 350 mm ... 800 mm
• Operation indicator
  LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
• Transfer rate
  COM2 (38.4 kBit/s)
• Signal output
  2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
• Product standard
  EN 60947-5-2
• Optical face
  PMMA
• Detection range max.
  40 ... 400 mm
Opening angle
approx. 0.3 °
Interface type
IO-Link ( via C/Q = BK )
IO-Link revision
1.1
Response time
2.3 ms
Degree of protection
IP67 / IP69 / IP69K
Wave length
680 nm
Mission Time (TM)
20 a
Control elements
Teach-In key
Switching current
max. 100 mA , resistive load
FDA approval
IEC 60825-1:2014 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Connection
2 m fixed cable
Light source
laser diode
max. pulse energy
< 40 nJ
Function indicator
LED yellow: constantly on - switch output active, constantly off - switch output inactive
Device profile
Identification and diagnosis, Smart Sensor type 0
Usage category
DC-12 and DC-13
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Laser class
1
Black-white difference (6 %/90 %)
< 2 %, ,
Protection class
III
Min. cycle time
2.3 ms
Switching frequency
217 Hz
CCC approval
CCC approval / marking not required for products rated ≤36 V
Cable length
2 m
Detection range
60 ... 350 mm
MTTFd
560 a
Operating voltage
10 ... 30 V DC
SIO mode support
yes
Voltage drop
≤ 1.5 V DC
Housing width
15 mm
Detection range min.
60 ... 100 mm
Ambient light limit
EN 60947-5-2 : 45000 Lux
Device ID
0x111812 (1120274)
Switching voltage
max. 30 V DC
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F) , fixed cable, -20 ... 60 °C (-4 ... 140 °F) , movable cable not appropriate for conveyor chains
Housing
PC (Polycarbonate)
Note
LASER LIGHT , DO NOT STARE INTO BEAM
Repetition rate
approx. 2.4 kHz
Ripple
max. 10 %
Switching type
The default setting is: C/Q - BK: NPN normally open, PNP normally closed, IO-Link, Q2 - WH: NPN normally open, PNP normally closed
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Mass
approx. 83 g

OQT350-R201-2EP-IO-L Related Documents