OQT350-R200-EP-IO-0,3M-V3-L Pepperl + Fuchs Electronic Components

Product Details

• Detection range min.
  60 ... 100 mm
• Diameter of the light spot
  approx. 3 mm at a distance of 350 mm
• Control elements
  Teach-In key
• Min. cycle time
  2.3 ms
• Communication interface
  IEC 61131-9
• Storage temperature
  -40 ... 70 °C (-40 ... 158 °F)
• Wave length
  680 nm
• Mission Time (TM)
  20 a
• IO-Link revision
  1.1
• Switching voltage
  max. 30 V DC
• Housing depth
  41.7 mm
• Light source
  laser diode
• Opening angle
  approx. 0.3 °
• Interface type
  IO-Link ( via C/Q = pin 4 )
• Switching type
  The default setting is: C/Q - Pin4: NPN normally open, PNP normally closed, IO-Link,
• Product standard
  EN 60947-5-2
• Housing height
  50.6 mm
• Laser class
  1
• Repetition rate
  approx. 2.4 kHz
• Function indicator
  LED yellow: constantly on - switch output active, constantly off - switch output inactive
Device profile
Identification and diagnosis, Smart Sensor type 0
Switching current
max. 100 mA , resistive load
Laser safety
EN 60825-1:2014
Housing
PC (Polycarbonate)
Reference target
standard white, 100 mm x 100 mm
Ambient light limit
EN 60947-5-2 : 45000 Lux
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
SIO mode support
yes
Response time
2.3 ms
Housing width
15 mm
Detection range
60 ... 350 mm
Pulse length
5.5 µs
Ripple
max. 10 %
Signal output
1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected, overvoltage protected
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Cable length
0.3 m
Light type
modulated visible red light
Beam divergence
> 5 mrad, d63 < 2,8 mm in the range of 350 mm ... 800 mm
Operating voltage
10 ... 30 V DC
Process data width
Process data input 2 Bit, Process data output 2 Bit
Switching frequency
217 Hz
CCC approval
CCC approval / marking not required for products rated ≤36 V
Mass
approx. 41 g
Detection range max.
40 ... 400 mm
Black-white difference (6 %/90 %)
< 2 %, ,
Diagnostic Coverage (DC)
0 %
Device ID
0x111802 (1120258)
Usage category
DC-12 and DC-13
FDA approval
IEC 60825-1:2014 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Connection
300 mm fixed cable with M8 x 1, 3-pin connector
Adjustment range
100 ... 350 mm
max. pulse energy
< 40 nJ
No-load supply current
< 16 mA at 24 V supply voltage
Transfer rate
COM2 (38.4 kBit/s)
Voltage drop
≤ 1.5 V DC
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F) , fixed cable, -20 ... 60 °C (-4 ... 140 °F) , movable cable not appropriate for conveyor chains
Optical face
PMMA
Note
LASER LIGHT , DO NOT STARE INTO BEAM
MTTFd
560 a
Protection class
III
Compatible master port type
A
EAC conformity
TR CU 020/2011
Degree of protection
IP67 / IP69 / IP69K

OQT350-R200-EP-IO-0,3M-V3-L Related Documents