OQT350-R201-2EP-IO-V31-L Pepperl + Fuchs Electronic Components

Product Details

• Detection range min.
  60 ... 100 mm
• Pulse length
  5.5 µs
• Control elements
  Teach-In key
• No-load supply current
  < 16 mA at 24 V supply voltage
• Response time
  2.3 ms
• Ambient temperature
  -40 ... 60 °C (-40 ... 140 °F),
• Detection range max.
  40 ... 400 mm
• Ambient light limit
  EN 60947-5-2 : 45000 Lux
• Operation indicator
  LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
• Process data width
  Process data input 2 Bit, Process data output 2 Bit
• Switching voltage
  max. 30 V DC
• Product standard
  EN 60947-5-2
• Housing width
  15 mm
• Detection range
  60 ... 350 mm
• Diameter of the light spot
  approx. 3 mm at a distance of 350 mm
• Min. cycle time
  2.3 ms
• Usage category
  DC-12 and DC-13
• CCC approval
  CCC approval / marking not required for products rated ≤36 V
• Housing
  PC (Polycarbonate)
• Adjustment range
  100 ... 350 mm
Opening angle
approx. 0.3 °
Device profile
Identification and diagnosis, Smart Sensor type 0
Switching current
max. 100 mA , resistive load
FDA approval
IEC 60825-1:2014 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Connection
4-pin, M8 x 1 connector, 90° rotatable
Reference target
standard white, 100 mm x 100 mm
MTTFd
560 a
Device ID
0x111812 (1120274)
Signal output
2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Note
LASER LIGHT , DO NOT STARE INTO BEAM
Housing depth
41.7 mm
Beam divergence
> 5 mrad, d63 < 2,8 mm in the range of 350 mm ... 800 mm
Mission Time (TM)
20 a
Interface type
IO-Link ( via C/Q = pin 4 )
Laser class
1
Light source
laser diode
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Mass
approx. 44 g
Repetition rate
approx. 2.4 kHz
Operating voltage
10 ... 30 V DC
Protection class
III
Voltage drop
≤ 1.5 V DC
Light type
modulated visible red light
max. pulse energy
< 40 nJ
Function indicator
LED yellow: constantly on - switch output active, constantly off - switch output inactive
Transfer rate
COM2 (38.4 kBit/s)
Compatible master port type
A
Laser safety
EN 60825-1:2014
Housing height
61.7 mm
Wave length
680 nm
Diagnostic Coverage (DC)
0 %
IO-Link revision
1.1
Switching type
The default setting is: C/Q - Pin4: NPN normally open, PNP normally closed, IO-Link, Q2 - Pin2: NPN normally-open, PNP normally-closed
Communication interface
IEC 61131-9
Optical face
PMMA
Black-white difference (6 %/90 %)
< 2 %, ,
Ripple
max. 10 %
SIO mode support
yes
Switching frequency
217 Hz
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Degree of protection
IP67 / IP69 / IP69K

OQT350-R201-2EP-IO-V31-L Related Documents