OQT350-R200-2EP-IO-L Pepperl + Fuchs Electronic Components

Product Details

• Detection range
  60 ... 350 mm
• MTTFd
  560 a
• No-load supply current
  < 16 mA at 24 V supply voltage
• Voltage drop
  ≤ 1.5 V DC
• UL approval
  E87056 , cULus Listed , class 2 power supply , type rating 1
• Connection
  2 m fixed cable
• Reference target
  standard white, 100 mm x 100 mm
• Diameter of the light spot
  approx. 3 mm at a distance of 350 mm
• Ripple
  max. 10 %
• Switching type
  The default setting is: C/Q - BK: NPN normally open, PNP normally closed, IO-Link, Q2 - WH: NPN normally open, PNP normally closed
• Laser safety
  EN 60825-1:2014
• Degree of protection
  IP67 / IP69 / IP69K
• Wave length
  680 nm
• Repetition rate
  approx. 2.4 kHz
• Diagnostic Coverage (DC)
  0 %
• Device ID
  0x111802 (1120258)
• Signal output
  2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
• EAC conformity
  TR CU 020/2011
• Mass
  approx. 73 g
• Light type
  modulated visible red light
Operating voltage
10 ... 30 V DC
Device profile
Identification and diagnosis, Smart Sensor type 0
Switching frequency
217 Hz
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Detection range min.
60 ... 100 mm
Opening angle
approx. 0.3 °
Protection class
III
Process data width
Process data input 2 Bit, Process data output 2 Bit
Product standard
EN 60947-5-2
Housing height
50.6 mm
Detection range max.
40 ... 400 mm
Ambient light limit
EN 60947-5-2 : 45000 Lux
Mission Time (TM)
20 a
SIO mode support
yes
FDA approval
IEC 60825-1:2014 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Cable length
2 m
Note
LASER LIGHT , DO NOT STARE INTO BEAM
Pulse length
5.5 µs
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
Transfer rate
COM2 (38.4 kBit/s)
Switching voltage
max. 30 V DC
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F) , fixed cable, -20 ... 60 °C (-4 ... 140 °F) , movable cable not appropriate for conveyor chains
Housing
PC (Polycarbonate)
Laser class
1
Beam divergence
> 5 mrad, d63 < 2,8 mm in the range of 350 mm ... 800 mm
Function indicator
LED yellow: constantly on - switch output active, constantly off - switch output inactive
IO-Link revision
1.1
Compatible master port type
A
Response time
2.3 ms
Housing width
15 mm
Optical face
PMMA
Adjustment range
100 ... 350 mm
max. pulse energy
< 40 nJ
Control elements
Teach-In key
Min. cycle time
2.3 ms
Usage category
DC-12 and DC-13
CCC approval
CCC approval / marking not required for products rated ≤36 V
Light source
laser diode
Black-white difference (6 %/90 %)
< 2 %, ,
Interface type
IO-Link ( via C/Q = BK )
Switching current
max. 100 mA , resistive load
Communication interface
IEC 61131-9
Housing depth
41.7 mm

OQT350-R200-2EP-IO-L Related Documents