OQT350-R200-2EP-IO-V1-L Pepperl + Fuchs Electronic Components

Product Details

• Reference target
  standard white, 100 mm x 100 mm
• Wave length
  680 nm
• Diagnostic Coverage (DC)
  0 %
• Signal output
  2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
• Response time
  2.3 ms
• Interface type
  IO-Link ( via C/Q = pin 4 )
• Beam divergence
  > 5 mrad, d63 < 2,8 mm in the range of 350 mm ... 800 mm
• Control elements
  Teach-In key
• IO-Link revision
  1.1
• Switching current
  max. 100 mA , resistive load
• UL approval
  E87056 , cULus Listed , class 2 power supply , type rating 1
• Housing depth
  41.7 mm
• Detection range
  60 ... 350 mm
• Opening angle
  approx. 0.3 °
• Protection class
  III
• Product standard
  EN 60947-5-2
• Housing width
  15 mm
• Detection range max.
  40 ... 400 mm
• max. pulse energy
  < 40 nJ
• Ripple
  max. 10 %
Switching voltage
max. 30 V DC
Laser safety
EN 60825-1:2014
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Note
LASER LIGHT , DO NOT STARE INTO BEAM
MTTFd
560 a
Device profile
Identification and diagnosis, Smart Sensor type 0
Voltage drop
≤ 1.5 V DC
Process data width
Process data input 2 Bit, Process data output 2 Bit
Degree of protection
IP67 / IP69 / IP69K
Laser class
1
Pulse length
5.5 µs
Ambient light limit
EN 60947-5-2 : 45000 Lux
Operating voltage
10 ... 30 V DC
Usage category
DC-12 and DC-13
Transfer rate
COM2 (38.4 kBit/s)
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F),
Mass
approx. 37 g
Detection range min.
60 ... 100 mm
Mission Time (TM)
20 a
Min. cycle time
2.3 ms
Communication interface
IEC 61131-9
Housing height
50.6 mm
Light type
modulated visible red light
Repetition rate
approx. 2.4 kHz
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
Device ID
0x111802 (1120258)
Switching frequency
217 Hz
FDA approval
IEC 60825-1:2014 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Housing
PC (Polycarbonate)
Light source
laser diode
Diameter of the light spot
approx. 3 mm at a distance of 350 mm
No-load supply current
< 16 mA at 24 V supply voltage
Switching type
The default setting is: C/Q - Pin4: NPN normally open, PNP normally closed, IO-Link, Q2 - Pin2: NPN normally-open, PNP normally-closed
EAC conformity
TR CU 020/2011
CCC approval
CCC approval / marking not required for products rated ≤36 V
Connection
4-pin, M12 x 1 connector, 90° rotatable
Adjustment range
100 ... 350 mm
Black-white difference (6 %/90 %)
< 2 %, ,
Function indicator
LED yellow: constantly on - switch output active, constantly off - switch output inactive
SIO mode support
yes
Compatible master port type
A
Optical face
PMMA

OQT350-R200-2EP-IO-V1-L Related Documents