OQT350-R200-EP-IO-V3-L Pepperl + Fuchs Electronic Components

Product Details

• Laser class
  1
• Beam divergence
  > 5 mrad, d63 < 2,8 mm in the range of 350 mm ... 800 mm
• Operation indicator
  LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
• Compatible master port type
  A
• Usage category
  DC-12 and DC-13
• EAC conformity
  TR CU 020/2011
• Detection range min.
  60 ... 100 mm
• MTTFd
  560 a
• Interface type
  IO-Link ( via C/Q = pin 4 )
• SIO mode support
  yes
• Product standard
  EN 60947-5-2
• Housing height
  50.6 mm
• Light source
  laser diode
• Black-white difference (6 %/90 %)
  < 2 %, ,
• IO-Link revision
  1.1
• Switching voltage
  max. 30 V DC
• CCC approval
  CCC approval / marking not required for products rated ≤36 V
• Housing
  PC (Polycarbonate)
• Detection range max.
  40 ... 400 mm
• Mission Time (TM)
  20 a
Device profile
Identification and diagnosis, Smart Sensor type 0
Device ID
0x111802 (1120258)
Switching frequency
217 Hz
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Housing depth
41.7 mm
Adjustment range
100 ... 350 mm
Opening angle
approx. 0.3 °
Function indicator
LED yellow: constantly on - switch output active, constantly off - switch output inactive
Signal output
1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected, overvoltage protected
Voltage drop
≤ 1.5 V DC
Housing width
15 mm
Detection range
60 ... 350 mm
Pulse length
5.5 µs
Diagnostic Coverage (DC)
0 %
Transfer rate
COM2 (38.4 kBit/s)
Switching current
max. 100 mA , resistive load
FDA approval
IEC 60825-1:2014 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Optical face
PMMA
Light type
modulated visible red light
Repetition rate
approx. 2.4 kHz
Ripple
max. 10 %
Process data width
Process data input 2 Bit, Process data output 2 Bit
Response time
2.3 ms
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F),
Note
LASER LIGHT , DO NOT STARE INTO BEAM
Diameter of the light spot
approx. 3 mm at a distance of 350 mm
No-load supply current
< 16 mA at 24 V supply voltage
Min. cycle time
2.3 ms
Laser safety
EN 60825-1:2014
Connection
Connector plug, M8 x 1, 3 pin, rotatable by 90°
Reference target
standard white, 100 mm x 100 mm
max. pulse energy
< 40 nJ
Operating voltage
10 ... 30 V DC
Protection class
III
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Degree of protection
IP67 / IP69 / IP69K
Wave length
680 nm
Ambient light limit
EN 60947-5-2 : 45000 Lux
Control elements
Teach-In key
Switching type
The default setting is: C/Q - Pin4: NPN normally open, PNP normally closed, IO-Link,
Communication interface
IEC 61131-9
Mass
approx. 35 g

OQT350-R200-EP-IO-V3-L Related Documents