OQT350-R200-2EP-IO-0,3M-V1-L Pepperl + Fuchs Electronic Components

Product Details

• Adjustment range
  100 ... 350 mm
• Light type
  modulated visible red light
• Black-white difference (6 %/90 %)
  < 2 %, ,
• Operation indicator
  LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
• Min. cycle time
  2.3 ms
• Laser class
  1
• Beam divergence
  > 5 mrad, d63 < 2,8 mm in the range of 350 mm ... 800 mm
• Mission Time (TM)
  20 a
• Transfer rate
  COM2 (38.4 kBit/s)
• Switching frequency
  217 Hz
• Reference target
  standard white, 100 mm x 100 mm
• Repetition rate
  approx. 2.4 kHz
• Diagnostic Coverage (DC)
  0 %
• IO-Link revision
  1.1
• Detection range max.
  40 ... 400 mm
• Ambient light limit
  EN 60947-5-2 : 45000 Lux
• Protection class
  III
• Compatible master port type
  A
• EAC conformity
  TR CU 020/2011
• Detection range
  60 ... 350 mm
max. pulse energy
< 40 nJ
Operating voltage
10 ... 30 V DC
Device profile
Identification and diagnosis, Smart Sensor type 0
Process data width
Process data input 2 Bit, Process data output 2 Bit
Light source
laser diode
Opening angle
approx. 0.3 °
Ripple
max. 10 %
Switching voltage
max. 30 V DC
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Mass
approx. 45 g
Wave length
680 nm
Control elements
Teach-In key
Switching current
max. 100 mA , resistive load
Laser safety
EN 60825-1:2014
Housing
PC (Polycarbonate)
Note
LASER LIGHT , DO NOT STARE INTO BEAM
No-load supply current
< 16 mA at 24 V supply voltage
Signal output
2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Communication interface
IEC 61131-9
Housing width
15 mm
Detection range min.
60 ... 100 mm
Pulse length
5.5 µs
MTTFd
560 a
Interface type
IO-Link ( via C/Q = pin 4 )
SIO mode support
yes
CCC approval
CCC approval / marking not required for products rated ≤36 V
Diameter of the light spot
approx. 3 mm at a distance of 350 mm
Function indicator
LED yellow: constantly on - switch output active, constantly off - switch output inactive
Device ID
0x111802 (1120258)
Response time
2.3 ms
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Optical face
PMMA
Switching type
The default setting is: C/Q - Pin4: NPN normally open, PNP normally closed, IO-Link, Q2 - Pin2: NPN normally-open, PNP normally-closed
Usage category
DC-12 and DC-13
Housing height
50.6 mm
Voltage drop
≤ 1.5 V DC
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F) , fixed cable, -20 ... 60 °C (-4 ... 140 °F) , movable cable not appropriate for conveyor chains
Cable length
0.3 m
Product standard
EN 60947-5-2
Housing depth
41.7 mm
FDA approval
IEC 60825-1:2014 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Degree of protection
IP67 / IP69 / IP69K
Connection
300 mm fixed cable with M12 x 1, 4-pin connector

OQT350-R200-2EP-IO-0,3M-V1-L Related Documents