OBD1400-R201-EP-IO-0,3M-V3 Pepperl + Fuchs Electronic Components

Product Details

• Diameter of the light spot
  approx. 50 mm at a distance of 1400 mm
• MTTFd
  724 a
• No-load supply current
  < 18 mA at 24 V Operating voltage
• Switching type
  The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / light-on, PNP normally closed / dark-on, IO-Link
• UL approval
  E87056 , cULus Listed , class 2 power supply , type rating 1
• Optical face
  PMMA
• Adjustment range
  200 ... 1400 mm
• Ambient light limit
  EN 60947-5-2 : 60000 Lux
• Process data width
  Process data input 1 Bit, Process data output 2 Bit
• Communication interface
  IEC 61131-9
• Housing
  PC (Polycarbonate)
• Reference target
  standard white, 100 mm x 100 mm
• Protection class
  III
• Switching frequency
  1000 Hz
• CCC approval
  CCC approval / marking not required for products rated ≤36 V
• Detection range min.
  100 ... 200 mm
• Mission Time (TM)
  20 a
• Ripple
  max. 10 %
• SIO mode support
  yes
• Response time
  0.5 ms
Housing height
61.7 mm
LED risk group labelling
exempt group
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
Transfer rate
COM2 (38.4 kBit/s)
Switching voltage
max. 30 V DC
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F) , fixed cable, -20 ... 60 °C (-4 ... 140 °F) , movable cable not appropriate for conveyor chains
Light type
modulated visible red light
Function indicator
LED yellow: constantly on - object detected, constantly off - object not detected
Interface type
IO-Link ( via C/Q = pin 4 )
Signal output
1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected, overvoltage protected
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Mass
approx. 51 g
Light source
LED
Control elements
Light-on/dark-on changeover switch
Compatible master port type
A
Usage category
DC-12 and DC-13
Connection
300 mm fixed cable with M8 x 1, 3-pin connector
Detection range
2 ... 1400 mm
Device ID
0x111111 (1118481)
IO-Link revision
1.1
Product standard
EN 60947-5-2
Housing depth
41.7 mm
Opening angle
2 °
Operating voltage
10 ... 30 V DC
Min. cycle time
2.3 ms
Voltage drop
≤ 1.5 V DC
Degree of protection
IP67 / IP69 / IP69K
Detection range max.
2 ... 1400 mm
Diagnostic Coverage (DC)
0 %
Device profile
Identification and diagnosis, Smart Sensor type 2.4
Switching current
max. 100 mA , resistive load
Housing width
15 mm
Cable length
0.3 m

OBD1400-R201-EP-IO-0,3M-V3 Related Documents