OBD1100-R101-2EP-IO-V31-IR Pepperl + Fuchs Electronic Components

Product Details

• LED risk group labelling
  exempt group
• Reference target
  standard white, 100 mm x 100 mm
• Detection range
  2 ... 1100 mm
• Adjustment range
  60 ... 1100 mm
• Light type
  modulated infrared light 850 nm
• Diameter of the light spot
  approx. 100 mm at a distance of 1000 mm
• Opening angle
  5.4 °
• Light source
  LED
• Detection range min.
  10 ... 60 mm
• No-load supply current
  < 25 mA at 24 V supply voltage
• Signal output
  2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
• EAC conformity
  TR CU 020/2011
• Mass
  approx. 10 g
• Ambient light limit
  EN 60947-5-2
• Protection class
  III
• Compatible master port type
  A
• UL approval
  E87056 , cULus Listed , class 2 power supply , type rating 1
• Ambient temperature
  -40 ... 60 °C (-40 ... 140 °F)
• Operating voltage
  10 ... 30 V DC
• MTTFd
  724 a
Device ID
0x110101 (1114369)
Process data width
Process data input 1 Bit, Process data output 2 Bit
Switching frequency
1000 Hz
Usage category
DC-12 and DC-13
Connection
M8 x 1 connector, 4-pin
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Diagnostic Coverage (DC)
0 %
Control elements
Light-on/dark-on changeover switch
IO-Link revision
1.1
Switching type
The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / light-on, PNP normally closed / dark-on, IO-Link, /Q - Pin2: NPN normally closed / dark-on, PNP normally open / light-on
Voltage drop
≤ 1.5 V DC
Communication interface
IEC 61131-9
Degree of protection
IP67 / IP69 / IP69K
Optical face
PMMA
Function indicator
LED yellow: constantly on - object detected, constantly off - object not detected
Interface type
IO-Link ( via C/Q = pin 4 )
Response time
0.5 ms
Housing width
13.9 mm
Ripple
max. 10 %
SIO mode support
yes
Switching voltage
max. 30 V DC
Housing height
41.4 mm
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
Min. cycle time
2.3 ms
Product standard
EN 60947-5-2
Housing
PC (Polycarbonate)
Mission Time (TM)
20 a
Transfer rate
COM2 (38.4 kBit/s)
Switching current
max. 100 mA , resistive load
Housing depth
18.3 mm

OBD1100-R101-2EP-IO-V31-IR Related Documents