OBD1400-R201-2EP-IO-0,3M-V1 Pepperl + Fuchs Electronic Components

Product Details

• Light source
  LED
• Mission Time (TM)
  20 a
• Process data width
  Process data input 1 Bit, Process data output 2 Bit
• Response time
  0.5 ms
• Housing height
  61.7 mm
• Optical face
  PMMA
• Light type
  modulated visible red light
• Opening angle
  2 °
• IO-Link revision
  1.1
• Product standard
  EN 60947-5-2
• Storage temperature
  -40 ... 70 °C (-40 ... 158 °F)
• Cable length
  0.3 m
• Detection range
  2 ... 1400 mm
• Control elements
  Light-on/dark-on changeover switch
• Protection class
  III
• Switching voltage
  max. 30 V DC
• Housing width
  15 mm
• Diameter of the light spot
  approx. 50 mm at a distance of 1400 mm
• MTTFd
  724 a
• Interface type
  IO-Link ( via C/Q = pin 4 )
Usage category
DC-12 and DC-13
Connection
300 mm fixed cable with M12 x 1, 4-pin connector
Ambient light limit
EN 60947-5-2 : 60000 Lux
No-load supply current
< 18 mA at 24 V Operating voltage
Compatible master port type
A
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Housing
PC (Polycarbonate)
Reference target
standard white, 100 mm x 100 mm
Diagnostic Coverage (DC)
0 %
SIO mode support
yes
Switching frequency
1000 Hz
Housing depth
41.7 mm
LED risk group labelling
exempt group
Function indicator
LED yellow: constantly on - object detected, constantly off - object not detected
Min. cycle time
2.3 ms
Voltage drop
≤ 1.5 V DC
CCC approval
CCC approval / marking not required for products rated ≤36 V
Adjustment range
200 ... 1400 mm
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
Device ID
0x111111 (1118481)
Switching current
max. 100 mA , resistive load
Degree of protection
IP67 / IP69 / IP69K
Detection range min.
100 ... 200 mm
Operating voltage
10 ... 30 V DC
Device profile
Identification and diagnosis, Smart Sensor type 2.4
Signal output
2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F) , fixed cable, -20 ... 60 °C (-4 ... 140 °F) , movable cable not appropriate for conveyor chains
Detection range max.
2 ... 1400 mm
Ripple
max. 10 %
Transfer rate
COM2 (38.4 kBit/s)
Switching type
The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / light-on, PNP normally closed / dark-on, IO-Link, /Q - Pin2: NPN normally closed / dark-on, PNP normally open / light-on
Communication interface
IEC 61131-9
Mass
approx. 55 g

OBD1400-R201-2EP-IO-0,3M-V1 Related Documents