OBD1000-R100-2EP-IO-0,3M-V31 Pepperl + Fuchs Electronic Components

Product Details

• Communication interface
  IEC 61131-9
• Housing depth
  21.5 mm
• UL approval
  E87056 , cULus Listed , class 2 power supply , type rating 1
• Adjustment range
  50 ... 1000 mm
• No-load supply current
  < 25 mA at 24 V supply voltage
• Storage temperature
  -40 ... 70 °C (-40 ... 158 °F)
• Ambient light limit
  EN 60947-5-2
• Device ID
  0x110101 (1114369)
• Signal output
  2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
• Ambient temperature
  -40 ... 60 °C (-40 ... 140 °F) , fixed cable, -25 ... 60 °C (-13 ... 140 °F) , movable cable not appropriate for conveyor chains
• Cable length
  0.3 m
• LED risk group labelling
  exempt group
• Function indicator
  LED yellow: constantly on - object detected, constantly off - object not detected
• Min. cycle time
  2.3 ms
• Voltage drop
  ≤ 1.5 V DC
• Degree of protection
  IP67 / IP69 / IP69K
• Detection range min.
  20 ... 50 mm
• MTTFd
  724 a
• Protection class
  III
• Switching frequency
  1000 Hz
Housing height
37.1 mm
Light source
LED
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
Transfer rate
COM2 (38.4 kBit/s)
Switching voltage
max. 30 V DC
Connection
fixed cable 300 mm with M8 x 1 male connector; 4-pin
Opening angle
3.7 °
Diameter of the light spot
approx. 65 mm at a distance of 1000 mm
Control elements
Light-on/dark-on changeover switch
Diagnostic Coverage (DC)
0 %
IO-Link revision
1.1
SIO mode support
yes
Switching current
max. 100 mA , resistive load
Light type
modulated visible red light
Reference target
standard white, 100 mm x 100 mm
Operating voltage
10 ... 30 V DC
Compatible master port type
A
Response time
0.5 ms
Detection range
2 ... 1000 mm
Ripple
max. 10 %
Mission Time (TM)
20 a
Interface type
IO-Link ( via C/Q = pin 4 )
Usage category
DC-12 and DC-13
Housing width
11 mm
Mass
approx. 10 g
Switching type
The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / light-on, PNP normally closed / dark-on, IO-Link, /Q - Pin2: NPN normally closed / dark-on, PNP normally open / light-on
Product standard
EN 60947-5-2
Housing
PC (Polycarbonate)
Process data width
Process data input 1 Bit, Process data output 2 Bit
EAC conformity
TR CU 020/2011
Optical face
PMMA

OBD1000-R100-2EP-IO-0,3M-V31 Related Documents