OBD1400-R201-EP-IO-V3 Pepperl + Fuchs Electronic Components

Product Details

• Opening angle
  2 °
• Ripple
  max. 10 %
• SIO mode support
  yes
• Communication interface
  IEC 61131-9
• Light type
  modulated visible red light
• No-load supply current
  < 18 mA at 24 V Operating voltage
• Switching type
  The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / light-on, PNP normally closed / dark-on, IO-Link
• Switching frequency
  1000 Hz
• Degree of protection
  IP67 / IP69 / IP69K
• Light source
  LED
• Operation indicator
  LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
• Signal output
  1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected, overvoltage protected
• Response time
  0.5 ms
• Housing
  PC (Polycarbonate)
• LED risk group labelling
  exempt group
• Adjustment range
  200 ... 1400 mm
• MTTFd
  724 a
• Ambient light limit
  EN 60947-5-2 : 60000 Lux
• Diameter of the light spot
  approx. 50 mm at a distance of 1400 mm
• Control elements
  Light-on/dark-on changeover switch
Interface type
IO-Link ( via C/Q = pin 4 )
Compatible master port type
A
Device profile
Identification and diagnosis, Smart Sensor type 2.4
Reference target
standard white, 100 mm x 100 mm
Function indicator
LED yellow: constantly on - object detected, constantly off - object not detected
Min. cycle time
2.3 ms
IO-Link revision
1.1
Switching voltage
max. 30 V DC
CCC approval
CCC approval / marking not required for products rated ≤36 V
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Mass
approx. 44 g
Detection range min.
100 ... 200 mm
Mission Time (TM)
20 a
Device ID
0x111111 (1118481)
Voltage drop
≤ 1.5 V DC
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Optical face
PMMA
Switching current
max. 100 mA , resistive load
Housing width
15 mm
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F),
Connection
Connector plug, M8 x 1, 3 pin, rotatable by 90°
Detection range
2 ... 1400 mm
Diagnostic Coverage (DC)
0 %
Protection class
III
Usage category
DC-12 and DC-13
Product standard
EN 60947-5-2
Detection range max.
2 ... 1400 mm
Operating voltage
10 ... 30 V DC
Transfer rate
COM2 (38.4 kBit/s)
Process data width
Process data input 1 Bit, Process data output 2 Bit
Housing height
61.7 mm
Housing depth
41.7 mm

OBD1400-R201-EP-IO-V3 Related Documents