OBD1000-R100-2EP-IO-V31 Pepperl + Fuchs Electronic Components

Product Details

• Reference target
  standard white, 100 mm x 100 mm
• Operating voltage
  10 ... 30 V DC
• IO-Link revision
  1.1
• Response time
  0.5 ms
• Housing width
  11 mm
• Light type
  modulated visible red light
• Ambient light limit
  EN 60947-5-2
• Interface type
  IO-Link ( via C/Q = pin 4 )
• Switching current
  max. 100 mA , resistive load
• Ambient temperature
  -40 ... 60 °C (-40 ... 140 °F)
• Mass
  approx. 10 g
• Opening angle
  3.7 °
• MTTFd
  724 a
• Process data width
  Process data input 1 Bit, Process data output 2 Bit
• Product standard
  EN 60947-5-2
• Housing depth
  21.5 mm
• Diameter of the light spot
  approx. 65 mm at a distance of 1000 mm
• Operation indicator
  LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
• Device ID
  0x110101 (1114369)
• Communication interface
  IEC 61131-9
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Light source
LED
Function indicator
LED yellow: constantly on - object detected, constantly off - object not detected
SIO mode support
yes
Switching type
The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / light-on, PNP normally closed / dark-on, IO-Link, /Q - Pin2: NPN normally closed / dark-on, PNP normally open / light-on
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
LED risk group labelling
exempt group
Diagnostic Coverage (DC)
0 %
Min. cycle time
2.3 ms
Switching voltage
max. 30 V DC
Connection
M8 x 1 connector, 4-pin
Mission Time (TM)
20 a
Protection class
III
Signal output
2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
EAC conformity
TR CU 020/2011
Optical face
PMMA
Detection range
2 ... 1000 mm
Control elements
Light-on/dark-on changeover switch
Transfer rate
COM2 (38.4 kBit/s)
Switching frequency
1000 Hz
Degree of protection
IP67 / IP69 / IP69K
Detection range min.
20 ... 50 mm
No-load supply current
< 25 mA at 24 V supply voltage
Compatible master port type
A
Voltage drop
≤ 1.5 V DC
Housing
PC (Polycarbonate)
Adjustment range
50 ... 1000 mm
Ripple
max. 10 %
Usage category
DC-12 and DC-13
Housing height
44.5 mm

OBD1000-R100-2EP-IO-V31 Related Documents