OBD1400-R200-2EP-IO-0,3M-V31 Pepperl + Fuchs Electronic Components

Product Details

• Light type
  modulated visible red light
• Ripple
  max. 10 %
• Switching voltage
  max. 30 V DC
• Housing width
  15 mm
• Mass
  approx. 41 g
• LED risk group labelling
  exempt group
• Opening angle
  2 °
• Min. cycle time
  2.3 ms
• Compatible master port type
  A
• CCC approval
  CCC approval / marking not required for products rated ≤36 V
• MTTFd
  724 a
• Device profile
  Identification and diagnosis, Smart Sensor type 2.4
• Usage category
  DC-12 and DC-13
• Housing height
  50.6 mm
• Adjustment range
  200 ... 1400 mm
• Ambient light limit
  EN 60947-5-2 : 60000 Lux
• Protection class
  III
• SIO mode support
  yes
• EAC conformity
  TR CU 020/2011
• Housing depth
  41.7 mm
Diameter of the light spot
approx. 50 mm at a distance of 1400 mm
Mission Time (TM)
20 a
Transfer rate
COM2 (38.4 kBit/s)
Voltage drop
≤ 1.5 V DC
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Cable length
0.3 m
Detection range max.
2 ... 1400 mm
No-load supply current
< 18 mA at 24 V Operating voltage
Switching current
max. 100 mA , resistive load
Communication interface
IEC 61131-9
Optical face
PMMA
Detection range
2 ... 1400 mm
Operating voltage
10 ... 30 V DC
IO-Link revision
1.1
Switching frequency
1000 Hz
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Light source
LED
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
Interface type
IO-Link ( via C/Q = pin 4 )
Switching type
The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / light-on, PNP normally closed / dark-on, IO-Link, /Q - Pin2: NPN normally closed / dark-on, PNP normally open / light-on
Response time
0.5 ms
Degree of protection
IP67 / IP69 / IP69K
Reference target
standard white, 100 mm x 100 mm
Diagnostic Coverage (DC)
0 %
Device ID
0x111101 (1118465)
Signal output
2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F) , fixed cable, -20 ... 60 °C (-4 ... 140 °F) , movable cable not appropriate for conveyor chains
Housing
PC (Polycarbonate)
Detection range min.
100 ... 200 mm
Function indicator
LED yellow: constantly on - object detected, constantly off - object not detected
Control elements
Light-on/dark-on changeover switch
Process data width
Process data input 1 Bit, Process data output 2 Bit
Product standard
EN 60947-5-2
Connection
fixed cable 300 mm with M8 x 1 male connector; 4-pin

OBD1400-R200-2EP-IO-0,3M-V31 Related Documents