OBD1000-R101-EP-IO-V3 Pepperl + Fuchs Electronic Components

Product Details

• Ambient light limit
  EN 60947-5-2
• Transfer rate
  COM2 (38.4 kBit/s)
• Signal output
  1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected, overvoltage protected
• Storage temperature
  -40 ... 70 °C (-40 ... 158 °F)
• Reference target
  standard white, 100 mm x 100 mm
• Ripple
  max. 10 %
• Process data width
  Process data input 1 Bit, Process data output 2 Bit
• Usage category
  DC-12 and DC-13
• UL approval
  E87056 , cULus Listed , class 2 power supply , type rating 1
• Mass
  approx. 10 g
• Light source
  LED
• Diagnostic Coverage (DC)
  0 %
• Operating voltage
  10 ... 30 V DC
• Switching frequency
  1000 Hz
• Connection
  M8 x 1 connector, 3-pin
• Detection range
  2 ... 1000 mm
• No-load supply current
  < 25 mA at 24 V supply voltage
• Min. cycle time
  2.3 ms
• Communication interface
  IEC 61131-9
• Degree of protection
  IP67 / IP69 / IP69K
Detection range min.
20 ... 50 mm
Function indicator
LED yellow: constantly on - object detected, constantly off - object not detected
Compatible master port type
A
Housing height
41.4 mm
Diameter of the light spot
approx. 65 mm at a distance of 1000 mm
Mission Time (TM)
20 a
Interface type
IO-Link ( via C/Q = pin 4 )
Switching current
max. 100 mA , resistive load
Housing width
13.9 mm
Light type
modulated visible red light
MTTFd
724 a
Protection class
III
Voltage drop
≤ 1.5 V DC
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F)
Optical face
PMMA
Adjustment range
50 ... 1000 mm
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
SIO mode support
yes
Response time
0.5 ms
Housing depth
18.3 mm
Opening angle
3.7 °
IO-Link revision
1.1
Switching type
The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / light-on, PNP normally closed / dark-on, IO-Link
Product standard
EN 60947-5-2
Housing
PC (Polycarbonate)
LED risk group labelling
exempt group
Control elements
Light-on/dark-on changeover switch
Device ID
0x110101 (1114369)
Switching voltage
max. 30 V DC
EAC conformity
TR CU 020/2011

OBD1000-R101-EP-IO-V3 Related Documents