OBD1000-R100-EP-IO-0,3M-V3 Pepperl + Fuchs Electronic Components

Product Details

• LED risk group labelling
  exempt group
• Ripple
  max. 10 %
• Transfer rate
  COM2 (38.4 kBit/s)
• Voltage drop
  ≤ 1.5 V DC
• Housing depth
  21.5 mm
• Detection range min.
  20 ... 50 mm
• Function indicator
  LED yellow: constantly on - object detected, constantly off - object not detected
• SIO mode support
  yes
• Switching frequency
  1000 Hz
• Housing height
  37.1 mm
• Opening angle
  3.7 °
• Control elements
  Light-on/dark-on changeover switch
• Process data width
  Process data input 1 Bit, Process data output 2 Bit
• UL approval
  E87056 , cULus Listed , class 2 power supply , type rating 1
• Degree of protection
  IP67 / IP69 / IP69K
• Reference target
  standard white, 100 mm x 100 mm
• Operation indicator
  LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
• Min. cycle time
  2.3 ms
• Response time
  0.5 ms
• Optical face
  PMMA
Detection range
2 ... 1000 mm
Diagnostic Coverage (DC)
0 %
IO-Link revision
1.1
Switching current
max. 100 mA , resistive load
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F) , fixed cable, -25 ... 60 °C (-13 ... 140 °F) , movable cable not appropriate for conveyor chains
Housing
PC (Polycarbonate)
Light source
LED
No-load supply current
< 25 mA at 24 V supply voltage
Switching type
The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / light-on, PNP normally closed / dark-on, IO-Link
Product standard
EN 60947-5-2
Mass
approx. 10 g
Light type
modulated visible red light
Protection class
III
Compatible master port type
A
Communication interface
IEC 61131-9
Adjustment range
50 ... 1000 mm
Ambient light limit
EN 60947-5-2
Device ID
0x110101 (1114369)
Usage category
DC-12 and DC-13
EAC conformity
TR CU 020/2011
Diameter of the light spot
approx. 65 mm at a distance of 1000 mm
MTTFd
724 a
Interface type
IO-Link ( via C/Q = pin 4 )
Signal output
1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected, overvoltage protected
Housing width
11 mm
Connection
300 mm fixed cable with M8 x 1, 3-pin connector
Mission Time (TM)
20 a
Operating voltage
10 ... 30 V DC
Switching voltage
max. 30 V DC
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Cable length
0.3 m

OBD1000-R100-EP-IO-0,3M-V3 Related Documents