OBD1000-R101-EP-IO-0,3M-V3 Pepperl + Fuchs Electronic Components

Product Details

• Light source
  LED
• MTTFd
  724 a
• Interface type
  IO-Link ( via C/Q = pin 4 )
• Response time
  0.5 ms
• Housing depth
  18.3 mm
• Detection range
  2 ... 1000 mm
• Ambient light limit
  EN 60947-5-2
• Control elements
  Light-on/dark-on changeover switch
• Compatible master port type
  A
• Usage category
  DC-12 and DC-13
• Degree of protection
  IP67 / IP69 / IP69K
• Reference target
  standard white, 100 mm x 100 mm
• Function indicator
  LED yellow: constantly on - object detected, constantly off - object not detected
• IO-Link revision
  1.1
• Process data width
  Process data input 1 Bit, Process data output 2 Bit
• EAC conformity
  TR CU 020/2011
• Connection
  300 mm fixed cable with M8 x 1, 3-pin connector
• Mission Time (TM)
  20 a
• No-load supply current
  < 25 mA at 24 V supply voltage
• Switching type
  The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / light-on, PNP normally closed / dark-on, IO-Link
Product standard
EN 60947-5-2
Housing
PC (Polycarbonate)
LED risk group labelling
exempt group
Protection class
III
Switching current
max. 100 mA , resistive load
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Cable length
0.3 m
Opening angle
3.7 °
Operating voltage
10 ... 30 V DC
Device ID
0x110101 (1114369)
Communication interface
IEC 61131-9
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F) , fixed cable, -25 ... 60 °C (-13 ... 140 °F) , movable cable not appropriate for conveyor chains
Adjustment range
50 ... 1000 mm
Transfer rate
COM2 (38.4 kBit/s)
Signal output
1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected, overvoltage protected
Housing height
33.8 mm
Mass
approx. 10 g
Diameter of the light spot
approx. 65 mm at a distance of 1000 mm
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
Switching voltage
max. 30 V DC
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Detection range min.
20 ... 50 mm
Diagnostic Coverage (DC)
0 %
Min. cycle time
2.3 ms
Switching frequency
1000 Hz
Optical face
PMMA
Light type
modulated visible red light
Ripple
max. 10 %
SIO mode support
yes
Voltage drop
≤ 1.5 V DC
Housing width
13.9 mm

OBD1000-R101-EP-IO-0,3M-V3 Related Documents