OBD1000-R101-2EP-IO Pepperl + Fuchs Electronic Components

Product Details

• Light source
  LED
• Operating voltage
  10 ... 30 V DC
• Process data width
  Process data input 1 Bit, Process data output 2 Bit
• Switching frequency
  1000 Hz
• Storage temperature
  -40 ... 70 °C (-40 ... 158 °F)
• Mass
  approx. 10 g
• MTTFd
  724 a
• Ripple
  max. 10 %
• Transfer rate
  COM2 (38.4 kBit/s)
• Response time
  0.5 ms
• Degree of protection
  IP67 / IP69 / IP69K
• Detection range
  2 ... 1000 mm
• Mission Time (TM)
  20 a
• Interface type
  IO-Link ( via C/Q = BK )
• Switching current
  max. 100 mA , resistive load
• Housing width
  13.9 mm
• LED risk group labelling
  exempt group
• Function indicator
  LED yellow: constantly on - object detected, constantly off - object not detected
• Min. cycle time
  2.3 ms
• Ambient temperature
  -40 ... 60 °C (-40 ... 140 °F) , fixed cable, -25 ... 60 °C (-13 ... 140 °F) , movable cable not appropriate for conveyor chains
Optical face
PMMA
Opening angle
3.7 °
Control elements
Light-on/dark-on changeover switch
Device ID
0x110101 (1114369)
SIO mode support
yes
Communication interface
IEC 61131-9
Connection
2 m fixed cable
Light type
modulated visible red light
Diagnostic Coverage (DC)
0 %
Switching type
The switching type of the sensor is adjustable. The default setting is: C/Q - BK: NPN normally open / light-on, PNP normally closed / dark-on, IO-Link, /Q - WH: NPN normally closed / dark-on, PNP normally open / light-on
EAC conformity
TR CU 020/2011
Diameter of the light spot
approx. 65 mm at a distance of 1000 mm
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
Usage category
DC-12 and DC-13
Housing height
33.8 mm
Cable length
2 m
Detection range min.
20 ... 50 mm
Ambient light limit
EN 60947-5-2
IO-Link revision
1.1
Compatible master port type
A
Voltage drop
≤ 1.5 V DC
Housing depth
18.3 mm
Reference target
standard white, 100 mm x 100 mm
No-load supply current
< 25 mA at 24 V supply voltage
Switching voltage
max. 30 V DC
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Adjustment range
50 ... 1000 mm
Protection class
III
Signal output
2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Product standard
EN 60947-5-2
Housing
PC (Polycarbonate)

OBD1000-R101-2EP-IO Related Documents