PROTECT-PE-02 Schmersal Electronic Components

Product Details

• Standards
  IEC 61508, IEC/EN 60204-1, EN 60947-5-1
• Wire breakage detection
  Yes
• Enclosure material
  Glass-fibre reinforced thermoplastic, ventilated
• Height
  126 mm
• Rated impulse withstand voltage Uimp
  4 kV
• Rated control voltage at AC 50 Hz, maximum
  26.4 VAC
• Contact resistance, maximum
  0.1 Ω
• Climatic stress
  EN 60068-2-78
• Electronic Fuse
  Yes
• Cable section, minimum
  0.2 mm²
• Degree of protection of the enclosure
  IP20
• Degree of pollution to VDE 0110
  2
• Gross weight
  180 g
• Integral System Diagnostics, general
  Yes
• Earth connection detection
  Yes
• Stop-Category
  0
• Terminal Connector
  Cage clamps
• Width
  65.5 mm
• Ambient temperature, maximum
  +55 °C
• Storage and transport temperature, maximum
  +85 °C
Degree of protection of clips or terminals
IP20
Overvoltage category
III
Rated control voltage at AC 60 Hz, maximum
26.4 VAC
Drop-out delay in case of emergency stop, maximum
10 ms
Input signal, LOW Signal 0
0 - 1 VDC
Current, Utilisation category DC12
0.1 A
Number of auxiliary contacts
2, 9
Number of signalling outputs
7
Cable section, maximum
2.5 mm²
Degree of protection of the mounting space
IP20
Rated AC voltage for controls at DC minimum
21.1 VDC
Rated AC voltage for controls, 60 Hz, minimum
21.1 VAC
Input signal, HIGH Signal 1
19 - 28,8 VDC
Number of LEDs
6
Terminal designations
IEC/EN 60947-1
Storage and transport temperature, minimum
-40 °C
Rated AC voltage for controls, 50 Hz, minimum
21.1 VAC
Input resistance at Ue
2,900 Ω
Current, Utilisation category DC13
2 A
Automatic reset function
Yes
Mounting
Snaps onto standard DIN rail to EN 60715
Mechanical life, minimum
10,000,000 Operations
Resistance to vibrations to EN 60068-2-6
10...55 Hz, Amplitude 0.35 mm, ± 15 %
Rated operating voltage
24 VDC -15% / +20%, residual ripple max. 10 %
Electrical power consumption
1.7 W
Pull-in delay at automatic start, maximum, typically
10 ms
Voltage, Utilisation category DC12
24 VDC
Number of openers
2
Depth
61 mm
Restistance to shock
30 g / 11 ms
Rated control voltage at DC, maximum
28.8 VDC
Drop-out delay in case of power failure, maximum
60 ms
Voltage, Utilisation category DC13
24 VDC
Conduction resistance, maximum
40 Ω
Ambient temperature, minimum
-25 °C
Note (Contact resistance)
in new state
Switching capacity, minimum
10 VDC
EMC rating
EMC-Directive
Switching capacity, maximum
0.1 A

PROTECT-PE-02 Related Documents