PROTECT-IE-11-SK Schmersal Electronic Components

Product Details

• Enclosure material
  Glass-fibre reinforced thermoplastic, ventilated
• Integral System Diagnostics, general
  Yes
• Cable section, maximum
  1.5 mm²
• Degree of protection of the enclosure
  IP20
• Rated impulse withstand voltage Uimp
  0.8 kV
• Overvoltage category
  III
• Note (Contact resistance)
  in new state
• Voltage, Utilisation category DC13
  24 VDC
• Input signal, HIGH Signal 1
  19 - 28,8 VDC
• Voltage, Utilisation category DC12
  24 VDC
• Gross weight
  140 g
• Removable Terminals
  Yes
• Mounting
  Snaps onto standard DIN rail to EN 60715
• Height
  126 mm
• Storage and transport temperature, maximum
  +85 °C
• Drop-out delay in case of emergency stop, maximum
  20 ms
• Electronic Fuse
  Yes
• Number of auxiliary contacts
  1
• Width
  48 mm
• Storage and transport temperature, minimum
  -40 °C
Rated control voltage at DC, maximum
28.8 VDC
Current, Utilisation category DC13
2 A
Standards
IEC 61508, IEC/EN 60204-1, EN 60947-5-1
Number of openers
1
Depth
61 mm
Degree of protection of clips or terminals
IP20
Degree of pollution to VDE 0110
2
Input signal, LOW Signal 0
0 - 1 VDC
Wire breakage detection
Yes
Automatic reset function
Yes
Number of safety contacts
2
Terminal Connector
Screw connection, plug-in
Resistance to vibrations to EN 60068-2-6
10...55 Hz, Amplitude 0.35 mm, ± 15 %
Rated AC voltage for controls at DC minimum
20.4 VDC
Contact resistance, maximum
0.1 Ω
Climatic stress
EN 60068-2-78
Number of shutters
1
Cable section, minimum
0.14 mm²
Ambient temperature, minimum
-25 °C
Rated operating voltage
24 VDC -15% / +20%, residual ripple max. 10 %
Switching capacity, minimum
10 mA
Conduction resistance, maximum
40 Ω
Stop-Category
0
Number of LEDs
5
Mechanical life, minimum
10,000,000 Operations
Degree of protection of the mounting space
IP20
Restistance to shock
30 g / 11 ms
Input resistance at Ue
2,900 Ω
Short-circuit recognition
Yes
Earth connection detection
Yes
Terminal designations
IEC/EN 60947-1
Ambient temperature, maximum
+55 °C
Electrical power consumption
1.7 W
Pull-in delay at automatic start, maximum
20 ms
Switching capacity, maximum
0.1 A
Current, Utilisation category DC12
0.1 A
EMC rating
EMC-Directive

PROTECT-IE-11-SK Related Documents