PROTECT-PE-02-SK Schmersal Electronic Components

Product Details

• Electronic Fuse
  Yes
• Number of auxiliary contacts
  2, 9
• Mounting
  Snaps onto standard DIN rail to EN 60715
• Degree of protection of the mounting space
  IP20
• Rated impulse withstand voltage Uimp
  4 kV
• Rated AC voltage for controls, 50 Hz, minimum
  21.1 VAC
• Drop-out delay in case of power failure, maximum
  60 ms
• Input signal, HIGH Signal 1
  19 - 28,8 VDC
• Cable section, minimum
  0.14 mm²
• Enclosure material
  Glass-fibre reinforced thermoplastic, ventilated
• Gross weight
  180 g
• Number of signalling outputs
  7
• Depth
  61 mm
• Ambient temperature, minimum
  -25 °C
• Rated control voltage at AC 50 Hz, maximum
  26.4 VAC
• Contact resistance, maximum
  0.1 Ω
• Automatic reset function
  Yes
• Earth connection detection
  Yes
• Terminal Connector
  Screw connection, plug-in
• Stop-Category
  0
Number of LEDs
6
Cable section, maximum
1.5 mm²
Degree of protection of clips or terminals
IP20
Number of openers
2
Terminal designations
IEC/EN 60947-1
Overvoltage category
III
Rated AC voltage for controls at DC minimum
21.1 VDC
Switching capacity, minimum
10 mA
Conduction resistance, maximum
40 Ω
Wire breakage detection
Yes
Tightening torque of Clips
0.6 Nm
Rated operating voltage
24 VDC -15% / +20%, residual ripple max. 10 %
Input resistance at Ue
2,900 Ω
Voltage, Utilisation category DC13
24 VDC
Voltage, Utilisation category DC12
24 VDC
Width
65.5 mm
Storage and transport temperature, minimum
-40 °C
Degree of pollution to VDE 0110
2
Electrical power consumption
1.7 W
Standards
IEC 61508, IEC/EN 60204-1, EN 60947-5-1
Resistance to vibrations to EN 60068-2-6
10...55 Hz, Amplitude 0.35 mm, ± 15 %
Note (Contact resistance)
in new state
Pull-in delay at automatic start, maximum, typically
10 ms
Climatic stress
EN 60068-2-78
Mechanical life, minimum
10,000,000 Operations
Degree of protection of the enclosure
IP20
Rated control voltage at DC, maximum
28.8 VDC
Current, Utilisation category DC13
2 A
Input signal, LOW Signal 0
0 - 1 VDC
EMC rating
EMC-Directive
Removable Terminals
Yes
Integral System Diagnostics, general
Yes
Height
126 mm
Restistance to shock
30 g / 11 ms
Rated AC voltage for controls, 60 Hz, minimum
21.1 VAC
Drop-out delay in case of emergency stop, maximum
10 ms
Switching capacity, maximum
0.1 A
Storage and transport temperature, maximum
+85 °C
Ambient temperature, maximum
+55 °C
Rated control voltage at AC 60 Hz, maximum
26.4 VAC
Current, Utilisation category DC12
0.1 A

PROTECT-PE-02-SK Related Documents