PROTECT-IE-02-SK Schmersal Electronic Components

Product Details

• Automatic reset function
  Yes
• Removable Terminals
  Yes
• Standards
  IEC 61508, IEC/EN 60204-1, EN 60947-5-1
• Cable section, maximum
  1.5 mm²
• Resistance to vibrations to EN 60068-2-6
  10...55 Hz, Amplitude 0.35 mm, ± 15 %
• Rated AC voltage for controls at DC minimum
  20.4 VDC
• Switching capacity, minimum
  10 mA
• Enclosure material
  Glass-fibre reinforced thermoplastic, ventilated
• Mechanical life, minimum
  10,000,000 Operations
• Height
  126 mm
• Ambient temperature, maximum
  +55 °C
• Contact resistance, maximum
  0.1 Ω
• Input signal, HIGH Signal 1
  19 - 28,8 VDC
• EMC rating
  EMC-Directive
• Electronic Fuse
  Yes
• Number of safety contacts
  2
• Width
  48 mm
• Storage and transport temperature, minimum
  -40 °C
• Rated operating voltage
  24 VDC -15% / +20%, residual ripple max. 10 %
• Voltage, Utilisation category DC13
  24 VDC
Current, Utilisation category DC12
0.1 A
Degree of protection of clips or terminals
IP20
Rated impulse withstand voltage Uimp
0.8 kV
Drop-out delay in case of emergency stop, maximum
20 ms
Current, Utilisation category DC13
2 A
Gross weight
140 g
Number of auxiliary contacts
1
Cable section, minimum
0.14 mm²
Storage and transport temperature, maximum
+85 °C
Rated control voltage at DC, maximum
28.8 VDC
Voltage, Utilisation category DC12
24 VDC
Short-circuit recognition
Yes
Earth connection detection
Yes
Degree of protection of the mounting space
IP20
Restistance to shock
30 g / 11 ms
Electrical power consumption
1.7 W
Conduction resistance, maximum
40 Ω
Wire breakage detection
Yes
Integral System Diagnostics, general
Yes
Terminal designations
IEC/EN 60947-1
Ambient temperature, minimum
-25 °C
Input resistance at Ue
2,900 Ω
Stop-Category
0
Number of openers
2
Terminal Connector
Screw connection, plug-in
Depth
61 mm
Degree of pollution to VDE 0110
2
Pull-in delay at automatic start, maximum
20 ms
Input signal, LOW Signal 0
0 - 1 VDC
Climatic stress
EN 60068-2-78
Number of LEDs
5
Mounting
Snaps onto standard DIN rail to EN 60715
Degree of protection of the enclosure
IP20
Overvoltage category
III
Note (Contact resistance)
in new state
Switching capacity, maximum
24 VDC

PROTECT-IE-02-SK Related Documents