PROTECT-IE-11 Schmersal Electronic Components

Product Details

• Wire breakage detection
  Yes
• Number of LEDs
  5
• Cable section, minimum
  0.2 mm²
• Restistance to shock
  30 g / 11 ms
• Input resistance at Ue
  2,900 Ω
• Current, Utilisation category DC13
  2 A
• Gross weight
  140 g
• Number of auxiliary contacts
  1
• Width
  48 mm
• Ambient temperature, minimum
  -25 °C
• Overvoltage category
  III
• Note (Contact resistance)
  in new state
• Voltage, Utilisation category DC12
  24 VDC
• Electronic Fuse
  Yes
• Earth connection detection
  Yes
• Terminal designations
  IEC/EN 60947-1
• Degree of protection of the enclosure
  IP20
• Degree of pollution to VDE 0110
  2
• Contact resistance, maximum
  0.1 Ω
• EMC rating
  EMC-Directive
Automatic reset function
Yes
Number of openers
1
Height
126 mm
Degree of protection of the mounting space
IP20
Electrical power consumption
1.7 W
Voltage, Utilisation category DC13
24 VDC
Current, Utilisation category DC12
0.1 A
Short-circuit recognition
Yes
Number of safety contacts
2
Terminal Connector
Cage clamps
Storage and transport temperature, minimum
-40 °C
Rated AC voltage for controls at DC minimum
20.4 VDC
Input signal, LOW Signal 0
0 - 1 VDC
Switching capacity, maximum
0.1 A
Enclosure material
Glass-fibre reinforced thermoplastic, ventilated
Mounting
Snaps onto standard DIN rail to EN 60715
Number of shutters
1
Degree of protection of clips or terminals
IP20
Storage and transport temperature, maximum
+85 °C
Rated control voltage at DC, maximum
28.8 VDC
Pull-in delay at automatic start, maximum
20 ms
Stop-Category
0
Mechanical life, minimum
10,000,000 Operations
Cable section, maximum
2.5 mm²
Ambient temperature, maximum
+55 °C
Rated impulse withstand voltage Uimp
0.8 kV
Drop-out delay in case of emergency stop, maximum
20 ms
Input signal, HIGH Signal 1
19 - 28,8 VDC
Standards
IEC 61508, IEC/EN 60204-1, EN 60947-5-1
Climatic stress
EN 60068-2-78
Integral System Diagnostics, general
Yes
Depth
61 mm
Resistance to vibrations to EN 60068-2-6
10...55 Hz, Amplitude 0.35 mm, ± 15 %
Rated operating voltage
24 VDC -15% / +20%, residual ripple max. 10 %
Switching capacity, minimum
10 mA
Conduction resistance, maximum
40 Ω

PROTECT-IE-11 Related Documents