TK 461-30Y Schmersal Electronic Components

Product Details

• Slide form
  Castor
• Note (Actuating speed)
  Actuating speed with vertical actuating angle to switch axis
• Width of sensor
  118 mm
• Ambient temperature, minimum
  -30 °C
• Number of shutters
  3
• Actuating speed, maximum
  0.5 m/s
• Terminal Connector
  Screw connection
• Diameter of Castor
  25 mm
• Switching element
  Normally open contact (NO)
• Standards
  EN 60947-5-1
• Actuating speed, minimum
  1 mm/min
• Wire cross-section
  13 AWG
• Ambient temperature, maximum
  +90 °C
• Gross weight
  1,990 g
• Cable section, minimum
  1.5 mm²
• Height of sensor
  229 mm
• Thermal test current
  16 A
• Roller material
  Plastic
• Actuating element
  Offset roller lever
• Note (Cable section)
  All indications about the cable section are including the conductor ferrules.
Width of Castor
6.5 mm
Note (Switching element)
with double break
Material of the contacts, electrical
Silver
Enclosure material
Grey cast iron, galvanised
Mechanical life, minimum
10,000,000 Operations
Degree of protection
IP65 to EN 60529
Utilisation category AC-15
4 A
Active principle
mechanical
Actuating angle, from right of switch axis
30 °
Contact opening
max. 2 x 6 mm
Length of sensor
64 mm
Rated impulse withstand voltage Uimp
6 kV
Enclosure coating material
painted
Actuating angle, from left of switch axis
45 °
Cable section, maximum
2.5 mm²
Rated insulation voltage Ui
400 V
Switching principle
Creep circuit element

TK 461-30Y Related Documents