TK 441-11Y Schmersal Electronic Components

Product Details

• Mechanical life, minimum
  10,000,000 Operations
• Slide form
  Castor
• Note (Actuating speed)
  Actuating speed with vertical actuating angle to switch axis
• Wire cross-section
  13 AWG
• Rated impulse withstand voltage Uimp
  6 kV
• Actuating angle, from left of switch axis
  45 °
• Cable section, maximum
  2.5 mm²
• Width of Castor
  6.5 mm
• Material of the contacts, electrical
  Silver
• Actuating speed, maximum
  0.5 m/s
• Length of sensor
  63 mm
• Degree of protection
  IP65 to EN 60529
• Roller material
  Plastic
• Actuating angle, from right of switch axis
  30 °
• Diameter of Castor
  25 mm
• Gross weight
  1,335 g
• Contact opening
  2 x 6 mm
• Width of sensor
  106 mm
• Utilisation category AC-15
  4 A
• Active principle
  mechanical
Actuating speed, minimum
1 mm/min
Cable section, minimum
1.5 mm²
Ambient temperature, minimum
-30 °C
Switching element
NO contact, NC contact
Actuating element
Offset roller lever
Enclosure material
Grey cast iron, galvanised
Note (Cable section)
All indications about the cable section are including the conductor ferrules.
Number of shutters
1
Standards
EN 60947-5-1
Switching principle
Creep circuit element
Number of openers
1
Terminal Connector
Screw connection
Thermal test current
16 A
Enclosure coating material
painted
Ambient temperature, maximum
+90 °C
Rated insulation voltage Ui
400 V
Note (Switching element)
with double break
Height of sensor
173 mm

TK 441-11Y Related Documents