TK 452-02Y Schmersal Electronic Components

Product Details

• Number of openers
  2
• Standards
  EN 60947-5-1
• Note (Actuating speed)
  Actuating speed with vertical actuating angle to switch axis
• Width of sensor
  118 mm
• Actuating angle, from left of switch axis
  45 °
• Cable section, maximum
  2.5 mm²
• Gross weight
  1,710 g
• Ambient temperature, minimum
  -30 °C
• Switching element
  Opener (NC)
• Active principle
  mechanical
• Actuating speed, maximum
  0.5 m/s
• Height of sensor
  201 mm
• Ambient temperature, maximum
  +90 °C
• Note (Switching element)
  with double break
• Slide form
  Castor
• Actuating speed, minimum
  1 mm/min
• Wire cross-section
  13 AWG
• Material of the contacts, electrical
  Silver
• Actuating element
  Offset roller lever
• Enclosure material
  Grey cast iron, galvanised
Roller material
Plastic
Actuating angle, from right of switch axis
30 °
Length of sensor
64 mm
Utilisation category AC-15
4 A
Mechanical life, minimum
10,000,000 Operations
Cable section, minimum
1.5 mm²
Contact opening
2 x 6 mm
Enclosure coating material
painted
Note (Cable section)
All indications about the cable section are including the conductor ferrules.
Terminal Connector
Screw connection
Width of Castor
6.5 mm
Rated insulation voltage Ui
400 V
Diameter of Castor
25 mm
Degree of protection
IP65 to EN 60529
Switching principle
Creep circuit element
Rated impulse withstand voltage Uimp
6 kV
Thermal test current
16 A

TK 452-02Y Related Documents