TK 452-12Y Schmersal Electronic Components

Product Details

• Number of openers
  2
• Actuating speed, maximum
  0.5 m/s
• Mechanical life, minimum
  10,000,000 Operations
• Diameter of Castor
  25 mm
• Slide form
  Castor
• Contact opening
  2 x 6 mm
• Note (Cable section)
  All indications about the cable section are including the conductor ferrules.
• Degree of protection
  IP65 to EN 60529
• Number of shutters
  1
• Note (Actuating speed)
  Actuating speed with vertical actuating angle to switch axis
• Material of the contacts, electrical
  Silver
• Wire cross-section
  13 AWG
• Rated insulation voltage Ui
  400 V
• Active principle
  mechanical
• Actuating angle, from right of switch axis
  30 °
• Length of sensor
  64 mm
• Ambient temperature, maximum
  +90 °C
• Roller material
  Plastic
• Terminal Connector
  Screw connection
• Actuating angle, from left of switch axis
  45 °
Height of sensor
201 mm
Actuating element
Offset roller lever
Standards
EN 60947-5-1
Cable section, minimum
1.5 mm²
Ambient temperature, minimum
-30 °C
Note (Switching element)
with double break
Enclosure material
Grey cast iron, galvanised
Gross weight
1,621 g
Width of Castor
6.5 mm
Width of sensor
118 mm
Enclosure coating material
painted
Cable section, maximum
2.5 mm²
Actuating speed, minimum
1 mm/min
Rated impulse withstand voltage Uimp
6 kV
Switching element
NO contact, NC contact
Utilisation category AC-15
400 VAC
Switching principle
Creep circuit element
Thermal test current
16 A

TK 452-12Y Related Documents