TK 441-11Y-T-M20 Schmersal Electronic Components

Product Details

• Actuating angle, from left of switch axis
  45 °
• Note (Cable section)
  All indications about the cable section are including the conductor ferrules.
• Width of Castor
  6.5 mm
• Gross weight
  1,340 g
• Material of the contacts, electrical
  Silver
• Actuating speed, minimum
  1 mm/min
• Actuating angle, from right of switch axis
  30 °
• Wire cross-section
  13 AWG
• Active principle
  mechanical
• Number of shutters
  1
• Enclosure coating material
  painted
• Actuating speed, maximum
  0.5 m/s
• Enclosure material
  Grey cast iron, galvanised
• Mechanical life, minimum
  10,000,000 Operations
• Terminal Connector
  Screw connection
• Height of sensor
  173 mm
• Rated insulation voltage Ui
  400 V
• Number of openers
  1
• Standards
  EN 60947-5-1
• Contact opening
  2 x 6 mm
Cable section, maximum
2.5 mm²
Diameter of Castor
25 mm
Slide form
Castor
Roller material
Plastic
Actuating element
Offset roller lever
Note (Actuating speed)
Actuating speed with vertical actuating angle to switch axis
Width of sensor
106 mm
Ambient temperature, minimum
-40 °C
Cable section, minimum
1.5 mm²
Length of sensor
63 mm
Ambient temperature, maximum
+200 °C
Thermal test current
16 A
Rated impulse withstand voltage Uimp
6 kV
Note (Switching element)
with double break
Degree of protection
IP65 to EN 60529
Switching principle
Creep circuit element
Switching element
NO contact, NC contact
Utilisation category AC-15
400 VAC

TK 441-11Y-T-M20 Related Documents