SLC440AS-ER-0650-14 Schmersal Safety Light Curtains

Product Details

• Reaction time, maximum
  23 ms
• Gross weight
  1,230 g
• Range, protection field, minimum
  300 mm
• Storage and transport temperature, maximum
  +70 °C
• Restistance to shock
  10 g / 16 ms
• AS-i Current consumption, maximum
  50 mA
• AS-i Parameter bits, P2
  No function
• Integral System Diagnostics, status
  Yes
• Terminal connector, Recipient
  Connector plug M12, 5-pole
• Resistance to vibrations to EN 60068-2-6
  10 … 55 Hz, amplitude 0.35 mm
• Degree of pollution to VDE 0100
  2
• AS-i Outputs, DO 0 … DO 3
  No Function
• Power consumption, Transmitter
  75 mA
• Enclosure material
  Aluminium
• Number of beams
  64
• Degree of protection
  IP67 to EN 60529
• AS-i Operating voltage, minimum
  18 VDC
• AS-i Version
  V 3.0
• AS-i Parameter bits, P3
  Internal device error (FID)
• Active principle
  optoelectronic
Range, protection field, maximum
7,000 mm
Height of Receiver
783 mm
Ambient temperature, minimum
-10 °C
Overvoltage category
III
AS-i Profile
S-0.B.F.E
Rated operating voltage
24 VDC -15% / +10% (stabilised PELV)
7-segment display
Yes
Height of the protection field
650 mm
Length of sensor
33 mm
Storage and transport temperature, minimum
-25 °C
AS-i Operating voltage AS-i maximum
31.6 VDC
AS-i Input, Channel 2
Data bits DI 2 / DI 3 = dynamic code transmission
Note (AS-i Input module address)
Preset to address 0, can be changed through AS-interface bus master or hand-held programming device
Safety functions
Yes
Terminal, Connector, Transmitter
Connector plug M12, 4-pole
Ambient temperature, maximum
+50 °C
Rated impulse withstand voltage Uimp
0.8 kV
AS-i Input, Channel 1
Data bits DI 0 / DI 1 = dynamic code transmission
Note (AS-i Parameter bits)
Set the parameter outputs to "1111" (0xF), FID: periphery error
Hide function
Yes
Wave length of the sensor
880 nm
Height of the Sensor (Transmitter)
763 mm
Rated insulation voltage Ui
32 VDC
AS-i Specification
Safety-Slave
AS-i Parameter bits, P0
No function
Power consumption, Receiver
150 mA
Standards
EN 50295, EN 62061, EN 61496-1
Terminal Connector
Connector
Detection ability for test bodies at v = 1.6 m/s
14 mm
Width of sensor
27.8 mm
Protection rating
III
Note (AS-i Operating voltage)
Protection against polarity reversal
AS-i Parameter bits, P1
Low beam quality
AS-i Input module address
0

SLC440AS-ER-0650-14 Related Documents