RSS16-SD-R-ST8H Schmersal Safety Switches

Product Details

• Current, Utilisation category DC13
  1 A
• Housing construction form
  Block
• Short-circuit recognition
  Yes
• Cascadable
  Yes
• Hysteresis (Switch distance), maximum
  2 mm
• Length of sensor
  91 mm
• Storage and transport temperature, maximum
  +85 °C
• Rated operating voltage, maximum
  26.4 VDC
• Operating current
  150 mA
• Sensor topology
  Sensor for series wiring
• Latching
  Yes
• Safety functions
  Yes
• Repeat accuracy R R
  0.5 mm
• Degree of protection
  IP65 to EN 60529, IP66 to EN 60529, IP67 to EN 60529
• Protection rating
  0
• Switching frequency, approx.
  1 Hz
• Current, Utilisation category DC12
  1 A
• Enclosure material
  Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
• Coding level according to ISO 14119
  Low
• Number of semi-conductor outputs with signaling function
  1
Series-wiring
Yes
Terminal Connector
Connector M12, 8-pole
Width of sensor
52 mm
Storage and transport temperature, minimum
-25 °C
Rated impulse withstand voltage Uimp
0.8 kV
Current leakage Ir
0.5 mA
Voltage, Utilisation category DC13
24 VDC
Diagnostic output
Yes
Standards
IEC 60947-5-3
Reaction time, maximum
100 ms
Number of fail-safe digital outputs
2
Switch distance
15 mm
Height of sensor
30 mm
Voltage type
DC (direct current)
Interfering radiation
IEC 61000-6-4
Versions
p-type
Duration of risk, maximum
200 ms
Gross weight
180 g
Integral System Diagnostics, status
Yes
Ensured switch distance ON Sao
5 mm
Rated insulation voltage Ui
32 VDC
Rated operating current (safety outputs)
1,000 mA
general information
Universal coding
Installation conditions (mechanical)
not flush
Serial diagnostics
Yes
Number of Series-wiring of sensors
31
Mounting
2 x M5, Cylinder head screw
Ambient temperature, minimum
-25 °C
Overvoltage category
III
Required rated short-circuit current to EN 60947-5-1
100 A
EMC rating
IEC 60947-3
Voltage drop Ud, maximum
2 V
Short circuit detection
Yes
Time to readiness, maximum
2,000 ms
Number of LEDs
2
Ensured switch distance OFF Sar
30 mm
Restistance to shock
30 g / 11 ms
Rated operating voltage, minimum
20.4 VDC
No-load supply current I0
100 mA
Output current, (fail-safe output), maximum
1 A
Ambient temperature, maximum
+70 °C
Active principle
RFID
Actuating panels
front side, rear, from head
Active area
lateral, front side, cover-side
Tightening torque of nuts, maximum
2 Nm
Note
The cable section of the interconnecting cable must be observed for both wiring variants! Cable length and cable section alter the voltage drop depending on the output current
Degree of pollution to VDE 0100
3
Voltage, Utilisation category DC12
24 VDC

RSS16-SD-R-ST8H Related Documents