RSS16-D-SK Schmersal Safety Switches

Product Details

• Standards
  IEC 60947-5-3
• Short-circuit recognition
  Yes
• Switch distance
  15 mm
• Rated insulation voltage Ui
  32 VDC
• Switching frequency, approx.
  1 Hz
• Voltage drop Ud, maximum
  2 V
• Interfering radiation
  IEC 61000-6-4
• Time to readiness, maximum
  2,000 ms
• Number of semi-conductor outputs with signaling function
  1
• Active area
  lateral, front side, cover-side
• Note
  The cable section of the interconnecting cable must be observed for both wiring variants! Cable length and cable section alter the voltage drop depending on the output current
• Rated operating current (safety outputs)
  1,000 mA
• Current, Utilisation category DC13
  0.05 A
• Coding level according to ISO 14119
  Low
• Short circuit detection
  Yes
• Actuating panels
  front side, rear, from head
• Ensured switch distance OFF Sar
  30 mm
• Ambient temperature, minimum
  -25 °C
• Storage and transport temperature, minimum
  -25 °C
• Voltage type
  DC (direct current)
Output current, (fail-safe output), maximum
1 A
Installation conditions (mechanical)
not flush
Reaction time, maximum
100 ms
Cascadable
Yes
Ensured switch distance ON Sao
12 mm
Overvoltage category
III
Operating current
50 mA
Voltage, Utilisation category DC13
24 VDC
EMC rating
IEC 60947-3
Duration of risk, maximum
200 ms
Active principle
RFID
Integral System Diagnostics, status
Yes
Repeat accuracy R R
0.5 mm
Height of sensor
30 mm
Width of sensor
52 mm
Ambient temperature, maximum
+70 °C
Protection rating
0
Rated operating voltage, minimum
20.4 VDC
Current leakage Ir
0.5 mA
general information
Universal coding
Gross weight
250 g
Series-wiring
Yes
Hysteresis (Switch distance), maximum
2 mm
Restistance to shock
30 g / 11 ms
Required rated short-circuit current to EN 60947-5-1
100 A
Voltage, Utilisation category DC12
24 VDC
Sensor topology
Sensor for series wiring
Safety functions
Yes
Mounting
2 x M5, Cylinder head screw
Length of sensor
91 mm
Degree of pollution to VDE 0100
3
Versions
p-type
Enclosure material
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Number of LEDs
2
Terminal Connector
Screw connection
Rated operating voltage, maximum
26.4 VDC
Housing construction form
Block
Diagnostic output
Yes
Number of fail-safe digital outputs
2
Tightening torque of nuts, maximum
2 Nm
Degree of protection
IP65 to EN 60529, IP67 to EN 60529
Storage and transport temperature, maximum
+85 °C
Rated impulse withstand voltage Uimp
0.8 kV
No-load supply current I0
100 mA
Current, Utilisation category DC12
0.05 A

RSS16-D-SK Related Documents