RSS16-D-ST8H Schmersal Safety Switches

Product Details

• Installation conditions (mechanical)
  not flush
• Duration of risk, maximum
  200 ms
• Reaction time, maximum
  100 ms
• Diagnostic output
  Yes
• Series-wiring
  Yes
• Safety functions
  Yes
• Number of LEDs
  2
• Cascadable
  Yes
• Sensor topology
  Sensor for series wiring
• Coding level according to ISO 14119
  Low
• Enclosure material
  Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
• Time to readiness, maximum
  2,000 ms
• Housing construction form
  Block
• Standards
  IEC 60947-5-3
• general information
  Universal coding
• Active principle
  RFID
• Gross weight
  160 g
• Short circuit detection
  Yes
• Short-circuit recognition
  Yes
• Repeat accuracy R R
  0.5 mm
Note
The cable section of the interconnecting cable must be observed for both wiring variants! Cable length and cable section alter the voltage drop depending on the output current
Storage and transport temperature, minimum
-25 °C
No-load supply current I0
100 mA
Versions
p-type
Current, Utilisation category DC12
0.05 A
Tightening torque of nuts, maximum
2 Nm
Width of sensor
52 mm
Overvoltage category
III
Switching frequency, approx.
1 Hz
Current, Utilisation category DC13
0.05 A
Switch distance
15 mm
Ensured switch distance ON Sao
12 mm
Length of sensor
91 mm
Height of sensor
30 mm
Restistance to shock
30 g / 11 ms
Rated impulse withstand voltage Uimp
0.8 kV
Rated operating current (safety outputs)
1,000 mA
Operating current
50 mA
Voltage drop Ud, maximum
2 V
Ensured switch distance OFF Sar
30 mm
Ambient temperature, maximum
+70 °C
Degree of pollution to VDE 0100
3
Output current, (fail-safe output), maximum
1 A
Terminal Connector
Connector M12, 8-pole
Storage and transport temperature, maximum
+85 °C
Voltage type
DC (direct current)
Rated operating voltage, minimum
20.4 VDC
Voltage, Utilisation category DC13
24 VDC
Ambient temperature, minimum
-25 °C
Protection rating
0
Rated operating voltage, maximum
26.4 VDC
Current leakage Ir
0.5 mA
Interfering radiation
IEC 61000-6-4
Degree of protection
IP65 to EN 60529, IP66 to EN 60529, IP67 to EN 60529
Rated insulation voltage Ui
32 VDC
Required rated short-circuit current to EN 60947-5-1
100 A
Voltage, Utilisation category DC12
24 VDC
EMC rating
IEC 60947-3
Integral System Diagnostics, status
Yes
Number of semi-conductor outputs with signaling function
1
Number of fail-safe digital outputs
2
Actuating panels
front side, rear, from head
Active area
lateral, front side, cover-side
Mounting
2 x M5, Cylinder head screw
Hysteresis (Switch distance), maximum
2 mm

RSS16-D-ST8H Related Documents