RSS16-I2-D-R-SK Schmersal Safety Switches

Product Details

• Coding level according to ISO 14119
  High
• Time to readiness, maximum
  2,000 ms
• Reaction time, maximum
  100 ms
• Number of LEDs
  2
• Ensured switch distance ON Sao
  5 mm
• Storage and transport temperature, maximum
  +85 °C
• No-load supply current I0
  100 mA
• Output current, (fail-safe output), maximum
  1 A
• Interfering radiation
  IEC 61000-6-4
• Cascadable
  Yes
• Active area
  lateral, front side, cover-side
• Repeat accuracy R R
  0.5 mm
• Width of sensor
  52 mm
• Degree of pollution to VDE 0100
  3
• Versions
  p-type
• Current, Utilisation category DC13
  0.05 A
• Gross weight
  250 g
• Short-circuit recognition
  Yes
• Actuating panels
  front side, rear, from head
• Ensured switch distance OFF Sar
  30 mm
Length of sensor
91 mm
Voltage type
DC (direct current)
Operating current
50 mA
Installation conditions (mechanical)
not flush
Enclosure material
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Integral System Diagnostics, status
Yes
Number of fail-safe digital outputs
2
Tightening torque of nuts, maximum
2 Nm
Ambient temperature, minimum
-25 °C
Restistance to shock
30 g / 11 ms
Rated operating voltage, maximum
26.4 VDC
Current, Utilisation category DC12
0.05 A
general information
Individual coding, multiple teaching
Short circuit detection
Yes
Mounting
2 x M5, Cylinder head screw
Height of sensor
30 mm
Rated insulation voltage Ui
32 VDC
Rated operating voltage, minimum
20.4 VDC
Voltage, Utilisation category DC13
24 VDC
Standards
IEC 60947-5-3
Duration of risk, maximum
200 ms
Hysteresis (Switch distance), maximum
2 mm
Note
The cable section of the interconnecting cable must be observed for both wiring variants! Cable length and cable section alter the voltage drop depending on the output current
Protection rating
0
Rated impulse withstand voltage Uimp
0.8 kV
Active principle
RFID
Diagnostic output
Yes
Overvoltage category
III
Rated operating current (safety outputs)
1,000 mA
Voltage drop Ud, maximum
2 V
Housing construction form
Block
Safety functions
Yes
Number of semi-conductor outputs with signaling function
1
Switch distance
15 mm
Storage and transport temperature, minimum
-25 °C
Ambient temperature, maximum
+70 °C
Switching frequency, approx.
1 Hz
Current leakage Ir
0.5 mA
Voltage, Utilisation category DC12
24 VDC
Required rated short-circuit current to EN 60947-5-1
100 A
EMC rating
IEC 60947-3

RSS16-I2-D-R-SK Related Documents