AZM300Z-ST-1P2P Schmersal Safety Switches

Product Details

• Current, Utilisation category DC13
  0.05 A
• Test pulse interval, typical
  1000 ms
• Current leakage Ir
  0.5 mA
• Voltage, Utilisation category DC12
  24 VDC
• Voltage drop Ud, maximum
  4 V
• Current, Utilisation category DC12
  0.05 A
• Voltage, Utilisation category DC13
  24 VDC
• Versions
  short-circuit proof, p-type
• Classification ZVEI CB24I, Source
  C2
• Duty cycle solenoid
  100 %
• Classification ZVEI CB24I, Sink
  C1, C2
• Test pulse interval, minimum
  100 ms
• Switching thresholds
  −3 V … 5 V (Low), 15 V … 30 V (High)
• Test pulse duration, maximum
  0.5 ms
• Switching frequency, maximum
  0.5 Hz
• Current consumption at 24V
  5 mA
• External wiring and device fuse rating
  2 A gG
• Required rated short-circuit current to EN 60947-5-1
  100 A
• Current consumption with solenoid ON, peak
  350 mA / 200 ms
• Current consumption with solenoid ON, average
  200 mA
No-load supply current I0
100 mA
Notes (Power supply, general)
stabilised PELV power supply
Operating voltage, minimum
20.4 VDC
Operating voltage, maximum
26.4 VDC
Overvoltage category
III
Rated impulse withstand voltage Uimp
0.8 kV
Degree of pollution to IEC/EN 60664-1
3
Rated insulation voltage Ui
32 VDC
Zulässige Aufstellhöhe über NN, maximum
2,000 m
Protection rating
III
Restistance to shock
30 g / 11 ms
Note (Relative humidity)
non-condensing, non-icing
Storage and transport temperature, maximum
+90 °C
Storage and transport temperature, minimum
-10 °C
Relative humidity, maximum
93 %
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
Ambient temperature, maximum
+60 °C
Ambient temperature, minimum
+0 °C
Height of sensor
35 mm
Degree of protection
IP66 to EN 60529, IP67 to EN 60529, IP69 to EN 60529
Width of sensor
87.5 mm
Note (series connection of the sensors)
Unlimited number of devices, oberserve external line fusing, max. 31 devices in case of serial diagnostic SD
Length of sensor
120 mm
Length of sensor chain, maximum
200 m
Terminal Connector
Connector M12, 8-pole, A-coded
Note (length of the sensor chain)
Cable length and cross-section change the voltage drop dependiing on the output current
Ensured switch distance OFF Sar
20 mm
Ensured switch distance ON Sao
1 mm
Tightening torque for the fixing screws, maximum
7 Nm
Switch distance
2 mm
Tightening torque of the fixing screws, minimum
6 Nm
Latching force, adjustable, position 2
50 N
Type of the fixing screws
2x M6
Standards
IEC 61508, IEC 60947-5-3, EN ISO 13849-1
Latching force, adjustable, position 1
25 N
Clamping force, maximum Fmax
1,500 N
Clamping force in accordance with ISO14119 Fzh
1,150 N
Short-circuit recognition
Yes
Angular offset between interlocking device and actuator, maximum
2 °
Number of fail-safe digital outputs
2
Note (Mechanical lifetime)
When using as door stop: ≥ 50.000 operations (door mass ≤ 5 kg and actuating speed ≤ 0.5 m/s)
Integral System Diagnostics, status
Yes
Mechanical life, minimum
1,000,000 Operations
Frequency band RFID
125 kHz
Safety functions
Yes
Series-wiring
Yes
Transmit power, maximum
-6 dB/m
Manual release
Yes
Coding level according to ISO 14119
Low
Short circuit detection
Yes
Enclosure material
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Latching
Yes
Response time safety outputs in case of switch-off by actuator, maximum
100 ms
Time to readiness, maximum
5,000 ms
Gross weight
610 g
Guard locking monitored
Yes
Power to unlock
Yes
Response time safety outputs in case of switch-off by safety inputs, maximum
1.5 ms
Duration of risk, maximum
200 ms
general information
Universal coding
Active principle
RFID

AZM300Z-ST-1P2P Related Documents