OQT150-R101-EP-IO-0,3M-V3-L Pepperl + Fuchs Electronic Components

Product Details

• Light source
  laser diode
• MTTFd
  560 a
• Ripple
  max. 10 %
• Compatible master port type
  A
• Response time
  2.3 ms
• Housing depth
  18.3 mm
• Note
  LASER LIGHT , DO NOT STARE INTO BEAM
• Diameter of the light spot
  approx. 2 mm at a distance of 150 mm
• Operating voltage
  10 ... 30 V DC
• Transfer rate
  COM2 (38.4 kBit/s)
• Switching current
  max. 100 mA , resistive load
• EAC conformity
  TR CU 020/2011
• Housing
  PC (Polycarbonate)
• Detection range min.
  8 ... 20 mm
• max. pulse energy
  15.2 nJ
• Protection class
  III
• Signal output
  1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected, overvoltage protected
• Switching frequency
  217 Hz
• Degree of protection
  IP67 / IP69 / IP69K
• Wave length
  680 nm
Ambient light limit
EN 60947-5-2 : 30000 Lux
No-load supply current
< 20 mA at 24 V supply voltage
Switching voltage
max. 30 V DC
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Light type
modulated visible red light
Laser class
1
Diagnostic Coverage (DC)
0 %
Min. cycle time
2.3 ms
Voltage drop
≤ 1.5 V DC
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F) , fixed cable, -25 ... 60 °C (-13 ... 140 °F) , movable cable not appropriate for conveyor chains
Detection range max.
8 ... 150 mm
Opening angle
approx. 1 °
Mission Time (TM)
20 a
Process data width
Process data input 2 Bit, Process data output 2 Bit
Product standard
EN 60947-5-2
Housing width
13.9 mm
Optical face
PMMA
Adjustment range
20 ... 150 mm
Repetition rate
approx. 3 kHz
Control elements
Teach-In key
SIO mode support
yes
Usage category
DC-12 and DC-13
Housing height
33.8 mm
Mass
approx. 17 g
Detection range
8 ... 150 mm
Beam divergence
> 5 mrad ; d63 < 1 mm in the range of 50 mm ... 250 mm
Function indicator
LED yellow: constantly on - switch output active, constantly off - switch output inactive
Interface type
IO-Link ( via C/Q = pin 4 )
Switching type
The default setting is: C/Q - Pin4: NPN normally open, PNP normally closed, IO-Link,
Laser safety
EN 60825-1:2014
Connection
300 mm fixed cable with M8 x 1, 3-pin connector
Reference target
standard white, 100 mm x 100 mm
Pulse length
3 µs
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
Device profile
Smart Sensor
FDA approval
IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Black-white difference (6 %/90 %)
< 3 % at 150 mm
IO-Link revision
1.1
Device ID
0x110802 (1116162)
Communication interface
IEC 61131-9
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Cable length
0.3 m

OQT150-R101-EP-IO-0,3M-V3-L Related Documents