OQT120-R103-2EP-IO-0,3M-V1-L Pepperl + Fuchs Electronic Components

Product Details

• Detection range min.
  8 ... 20 mm
• Black-white difference (6 %/90 %)
  < 3 % at 120 mm
• IO-Link revision
  1.1
• Device ID
  0x110804 (1116164)
• Switching voltage
  max. 30 V DC
• Ambient temperature
  -40 ... 60 °C (-40 ... 140 °F) , fixed cable, -25 ... 60 °C (-13 ... 140 °F) , movable cable not appropriate for conveyor chains
• Reference target
  standard white, 100 mm x 100 mm
• Ambient light limit
  EN 60947-5-2 : 30000 Lux
• Protection class
  III
• SIO mode support
  yes
• Product standard
  EN 60947-5-2
• Connection
  300 mm fixed cable with M12 x 1, 4-pin connector
• Detection range
  8 ... 120 mm
• max. pulse energy
  15.2 nJ
• Diagnostic Coverage (DC)
  0 %
• Signal output
  2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
• Communication interface
  IEC 61131-9
• Degree of protection
  IP67 / IP69 / IP69K
• Light source
  laser diode
• Wave length
  680 nm
Device profile
Smart Sensor
Switching current
max. 100 mA , resistive load
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Cable length
0.3 m
Mission Time (TM)
20 a
Ripple
max. 10 %
Compatible master port type
A
Laser safety
EN 60825-1:2014
Housing height
36.5 mm
Adjustment range
20 ... 120 mm
Beam divergence
> 5 mrad ; d63 < 1 mm in the range of 50 mm ... 250 mm
MTTFd
560 a
Function indicator
LED yellow: constantly on - switch output active, constantly off - switch output inactive
Switching type
The default setting is: C/Q - Pin4: NPN normally open, PNP normally closed, IO-Link, Q2 - Pin2: NPN normally-open, PNP normally-closed
FDA approval
IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Mass
approx. 23 g
Laser class
1
Pulse length
3 µs
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
No-load supply current
< 20 mA at 24 V supply voltage
Usage category
DC-12 and DC-13
Response time
2.3 ms
Housing depth
26.7 mm
Light type
modulated visible red light
Repetition rate
approx. 3 kHz
Operating voltage
10 ... 30 V DC
Transfer rate
COM2 (38.4 kBit/s)
Voltage drop
≤ 1.5 V DC
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Housing
PC (Polycarbonate)
Detection range max.
8 ... 120 mm
Opening angle
approx. 1 °
Control elements
Teach-In key
Min. cycle time
2.3 ms
Switching frequency
217 Hz
Housing width
15 mm
Note
LASER LIGHT , DO NOT STARE INTO BEAM
Diameter of the light spot
approx. 2 mm at a distance of 120 mm
Interface type
IO-Link ( via C/Q = pin 4 )
Process data width
Process data input 2 Bit, Process data output 2 Bit
EAC conformity
TR CU 020/2011
Optical face
PMMA

OQT120-R103-2EP-IO-0,3M-V1-L Related Documents