OQT150-R100-2EP-IO-0,3M-V1-L Pepperl + Fuchs Electronic Components

Product Details

• Adjustment range
  20 ... 150 mm
• Beam divergence
  > 5 mrad ; d63 < 1 mm in the range of 50 mm ... 250 mm
• Operation indicator
  LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
• Device ID
  0x110802 (1116162)
• Response time
  2.3 ms
• FDA approval
  IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
• Housing depth
  21.5 mm
• Reference target
  standard white, 100 mm x 100 mm
• Ambient light limit
  EN 60947-5-2 : 30000 Lux
• Interface type
  IO-Link ( via C/Q = pin 4 )
• Transfer rate
  COM2 (38.4 kBit/s)
• Usage category
  DC-12 and DC-13
• Housing height
  37.1 mm
• Note
  LASER LIGHT , DO NOT STARE INTO BEAM
• max. pulse energy
  15.2 nJ
• Operating voltage
  10 ... 30 V DC
• Compatible master port type
  A
• Voltage drop
  ≤ 1.5 V DC
• Housing width
  11 mm
• Light source
  laser diode
MTTFd
560 a
Protection class
III
Switching type
The default setting is: C/Q - Pin4: NPN normally open, PNP normally closed, IO-Link, Q2 - Pin2: NPN normally-open, PNP normally-closed
Laser safety
EN 60825-1:2014
Mass
approx. 17 g
Wave length
680 nm
Mission Time (TM)
20 a
IO-Link revision
1.1
Signal output
2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Product standard
EN 60947-5-2
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F) , fixed cable, -25 ... 60 °C (-13 ... 140 °F) , movable cable not appropriate for conveyor chains
Detection range max.
8 ... 150 mm
Opening angle
approx. 1 °
No-load supply current
< 20 mA at 24 V supply voltage
SIO mode support
yes
EAC conformity
TR CU 020/2011
Connection
300 mm fixed cable with M12 x 1, 4-pin connector
Laser class
1
Repetition rate
approx. 3 kHz
Function indicator
LED yellow: constantly on - switch output active, constantly off - switch output inactive
Process data width
Process data input 2 Bit, Process data output 2 Bit
Communication interface
IEC 61131-9
Cable length
0.3 m
Detection range min.
8 ... 20 mm
Black-white difference (6 %/90 %)
< 3 % at 150 mm
Control elements
Teach-In key
Switching voltage
max. 30 V DC
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Optical face
PMMA
Light type
modulated visible red light
Diameter of the light spot
approx. 2 mm at a distance of 150 mm
Ripple
max. 10 %
Device profile
Smart Sensor
Switching current
max. 100 mA , resistive load
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Housing
PC (Polycarbonate)
Detection range
8 ... 150 mm
Pulse length
3 µs
Diagnostic Coverage (DC)
0 %
Min. cycle time
2.3 ms
Switching frequency
217 Hz
Degree of protection
IP67 / IP69 / IP69K

OQT150-R100-2EP-IO-0,3M-V1-L Related Documents