OQT120-R103-EP-IO-0,3M-V3 Pepperl + Fuchs Electronic Components

Product Details

• Adjustment range
  20 ... 120 mm
• Mission Time (TM)
  20 a
• Device ID
  0x110803 (1116163)
• LED risk group labelling
  exempt group
• Control elements
  Teach-In key
• Protection class
  III
• Switching voltage
  max. 30 V DC
• Housing height
  36.5 mm
• Opening angle
  approx. 4 °
• Function indicator
  LED yellow: constantly on - switch output active, constantly off - switch output inactive
• Compatible master port type
  A
• Communication interface
  IEC 61131-9
• Connection
  300 mm fixed cable with M8 x 1, 3-pin connector
• Detection range min.
  5 ... 20 mm
• Diameter of the light spot
  approx. 8 mm at a distance of 120 mm
• Interface type
  IO-Link ( via C/Q = pin 4 )
• Signal output
  1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected, overvoltage protected
• Usage category
  DC-12 and DC-13
• Storage temperature
  -40 ... 70 °C (-40 ... 158 °F)
• Housing width
  15 mm
Cable length
0.3 m
Light type
modulated visible red light
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
IO-Link revision
1.1
Switching type
The default setting is: C/Q - Pin4: NPN normally open, PNP normally closed, IO-Link,
Switching frequency
217 Hz
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F) , fixed cable, -25 ... 60 °C (-13 ... 140 °F) , movable cable not appropriate for conveyor chains
Black-white difference (6 %/90 %)
< 5 % at 120 mm
Ripple
max. 10 %
Process data width
Process data input 2 Bit, Process data output 2 Bit
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Degree of protection
IP67 / IP69 / IP69K
Detection range max.
5 ... 120 mm
MTTFd
600 a
Transfer rate
COM2 (38.4 kBit/s)
Voltage drop
≤ 1.5 V DC
Housing
PC (Polycarbonate)
Light source
LED
Operating voltage
10 ... 30 V DC
Min. cycle time
2.3 ms
Response time
2.3 ms
Optical face
PMMA
Reference target
standard white, 100 mm x 100 mm
Ambient light limit
EN 60947-5-2 : 30000 Lux
Device profile
Smart Sensor
Switching current
max. 100 mA , resistive load
EAC conformity
TR CU 020/2011
Mass
approx. 17 g
Detection range
5 ... 120 mm
Diagnostic Coverage (DC)
0 %
No-load supply current
< 25 mA at 24 V supply voltage
SIO mode support
yes
Product standard
EN 60947-5-2
Housing depth
26.7 mm

OQT120-R103-EP-IO-0,3M-V3 Related Documents