OQT120-R103-2EP-IO-0,3M-V1 Pepperl + Fuchs Electronic Components

Product Details

• Black-white difference (6 %/90 %)
  < 5 % at 120 mm
• Control elements
  Teach-In key
• Device ID
  0x110803 (1116163)
• Voltage drop
  ≤ 1.5 V DC
• Signal output
  2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
• LED risk group labelling
  exempt group
• Ambient light limit
  EN 60947-5-2 : 30000 Lux
• Interface type
  IO-Link ( via C/Q = pin 4 )
• Compatible master port type
  A
• Communication interface
  IEC 61131-9
• Mass
  approx. 23 g
• Reference target
  standard white, 100 mm x 100 mm
• Diagnostic Coverage (DC)
  0 %
• Min. cycle time
  2.3 ms
• Switching frequency
  217 Hz
• Housing width
  15 mm
• Detection range max.
  5 ... 120 mm
• Function indicator
  LED yellow: constantly on - switch output active, constantly off - switch output inactive
• Protection class
  III
• SIO mode support
  yes
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F) , fixed cable, -25 ... 60 °C (-13 ... 140 °F) , movable cable not appropriate for conveyor chains
Cable length
0.3 m
Opening angle
approx. 4 °
Detection range min.
5 ... 20 mm
No-load supply current
< 25 mA at 24 V supply voltage
Switching current
max. 100 mA , resistive load
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Degree of protection
IP67 / IP69 / IP69K
Light source
LED
Detection range
5 ... 120 mm
Ripple
max. 10 %
Switching voltage
max. 30 V DC
EAC conformity
TR CU 020/2011
Housing height
36.5 mm
Diameter of the light spot
approx. 8 mm at a distance of 120 mm
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
IO-Link revision
1.1
Product standard
EN 60947-5-2
Mission Time (TM)
20 a
Transfer rate
COM2 (38.4 kBit/s)
Usage category
DC-12 and DC-13
Housing depth
26.7 mm
Connection
300 mm fixed cable with M12 x 1, 4-pin connector
Light type
modulated visible red light
MTTFd
600 a
Device profile
Smart Sensor
Switching type
The default setting is: C/Q - Pin4: NPN normally open, PNP normally closed, IO-Link, Q2 - Pin2: NPN normally-open, PNP normally-closed
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Housing
PC (Polycarbonate)
Adjustment range
20 ... 120 mm
Operating voltage
10 ... 30 V DC
Process data width
Process data input 2 Bit, Process data output 2 Bit
Response time
2.3 ms
Optical face
PMMA

OQT120-R103-2EP-IO-0,3M-V1 Related Documents