OQT150-R100-EP-IO-V3-L Pepperl + Fuchs Electronic Components

Product Details

• Detection range max.
  8 ... 150 mm
• Diameter of the light spot
  approx. 2 mm at a distance of 150 mm
• Diagnostic Coverage (DC)
  0 %
• Min. cycle time
  2.3 ms
• Signal output
  1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected, overvoltage protected
• Housing width
  11 mm
• Laser class
  1
• Note
  LASER LIGHT , DO NOT STARE INTO BEAM
• Ambient light limit
  EN 60947-5-2 : 30000 Lux
• Detection range
  8 ... 150 mm
• Pulse length
  3 µs
• Function indicator
  LED yellow: constantly on - switch output active, constantly off - switch output inactive
• Device ID
  0x110802 (1116162)
• Usage category
  DC-12 and DC-13
• Housing height
  44.5 mm
• Reference target
  standard white, 100 mm x 100 mm
• Repetition rate
  approx. 3 kHz
• Opening angle
  approx. 1 °
• IO-Link revision
  1.1
• Switching voltage
  max. 30 V DC
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Mass
approx. 10 g
Detection range min.
8 ... 20 mm
Black-white difference (6 %/90 %)
< 3 % at 150 mm
Control elements
Teach-In key
Transfer rate
COM2 (38.4 kBit/s)
Switching frequency
217 Hz
Degree of protection
IP67 / IP69 / IP69K
Adjustment range
20 ... 150 mm
Wave length
680 nm
Protection class
III
Switching current
max. 100 mA , resistive load
FDA approval
IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Optical face
PMMA
Light source
laser diode
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
Device profile
Smart Sensor
Voltage drop
≤ 1.5 V DC
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F),
Beam divergence
> 5 mrad ; d63 < 1 mm in the range of 50 mm ... 250 mm
MTTFd
560 a
Interface type
IO-Link ( via C/Q = pin 4 )
Switching type
The default setting is: C/Q - Pin4: NPN normally open, PNP normally closed, IO-Link,
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Housing
PC (Polycarbonate)
Mission Time (TM)
20 a
Ripple
max. 10 %
Process data width
Process data input 2 Bit, Process data output 2 Bit
Product standard
EN 60947-5-2
Laser safety
EN 60825-1:2014
No-load supply current
< 20 mA at 24 V supply voltage
SIO mode support
yes
Communication interface
IEC 61131-9
Housing depth
21.5 mm
Light type
modulated visible red light
max. pulse energy
15.2 nJ
Operating voltage
10 ... 30 V DC
Compatible master port type
A
Response time
2.3 ms
Connection
M8 x 1 connector, 3-pin

OQT150-R100-EP-IO-V3-L Related Documents