OQT150-R100-2EP-IO Pepperl + Fuchs Electronic Components

Product Details

• Detection range max.
  5 ... 150 mm
• Opening angle
  approx. 4 °
• IO-Link revision
  1.1
• Usage category
  DC-12 and DC-13
• Product standard
  EN 60947-5-2
• Cable length
  2 m
• Light type
  modulated visible red light
• No-load supply current
  < 25 mA at 24 V supply voltage
• Min. cycle time
  2.3 ms
• Switching frequency
  217 Hz
• Housing width
  11 mm
• Adjustment range
  20 ... 150 mm
• Operation indicator
  LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
• Device profile
  Smart Sensor
• Connection
  2 m fixed cable
• Diameter of the light spot
  approx. 10 mm at a distance of 150 mm
• Function indicator
  LED yellow: constantly on - switch output active, constantly off - switch output inactive
• Switching type
  The default setting is: C/Q - BK: NPN normally open, PNP normally closed, IO-Link, Q2 - WH: NPN normally open, PNP normally closed
• Communication interface
  IEC 61131-9
• Degree of protection
  IP67 / IP69 / IP69K
Detection range min.
5 ... 20 mm
Control elements
Teach-In key
Process data width
Process data input 2 Bit, Process data output 2 Bit
Response time
2.3 ms
Housing depth
21.5 mm
Light source
LED
Diagnostic Coverage (DC)
0 %
Protection class
III
Switching voltage
max. 30 V DC
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Optical face
PMMA
Black-white difference (6 %/90 %)
< 5 % at 150 mm
Mission Time (TM)
20 a
SIO mode support
yes
Signal output
2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Housing height
37.1 mm
Detection range
5 ... 150 mm
MTTFd
600 a
Operating voltage
10 ... 30 V DC
Interface type
IO-Link ( via C/Q = BK )
Voltage drop
≤ 1.5 V DC
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Housing
PC (Polycarbonate)
Reference target
standard white, 100 mm x 100 mm
LED risk group labelling
exempt group
Ambient light limit
EN 60947-5-2 : 30000 Lux
Ripple
max. 10 %
Transfer rate
COM2 (38.4 kBit/s)
Device ID
0x110801 (1116161)
Compatible master port type
A
Switching current
max. 100 mA , resistive load
EAC conformity
TR CU 020/2011
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F) , fixed cable, -25 ... 60 °C (-13 ... 140 °F) , movable cable not appropriate for conveyor chains
Mass
approx. 36 g

OQT150-R100-2EP-IO Related Documents