OQT150-R100-2EP-IO-L Pepperl + Fuchs Electronic Components

Product Details

• Note
  LASER LIGHT , DO NOT STARE INTO BEAM
• Black-white difference (6 %/90 %)
  < 3 % at 150 mm
• Protection class
  III
• Switching current
  max. 100 mA , resistive load
• Product standard
  EN 60947-5-2
• Degree of protection
  IP67 / IP69 / IP69K
• Light source
  laser diode
• Opening angle
  approx. 1 °
• Transfer rate
  COM2 (38.4 kBit/s)
• Usage category
  DC-12 and DC-13
• UL approval
  E87056 , cULus Listed , class 2 power supply , type rating 1
• Optical face
  PMMA
• Pulse length
  3 µs
• MTTFd
  560 a
• Ripple
  max. 10 %
• Light type
  modulated visible red light
• Mission Time (TM)
  20 a
• Function indicator
  LED yellow: constantly on - switch output active, constantly off - switch output inactive
• Device profile
  Smart Sensor
• Detection range max.
  8 ... 150 mm
Diagnostic Coverage (DC)
0 %
Min. cycle time
2.3 ms
Switching voltage
max. 30 V DC
Laser safety
EN 60825-1:2014
Cable length
2 m
Reference target
standard white, 100 mm x 100 mm
Ambient light limit
EN 60947-5-2 : 30000 Lux
Control elements
Teach-In key
Process data width
Process data input 2 Bit, Process data output 2 Bit
FDA approval
IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Housing depth
21.5 mm
Detection range min.
8 ... 20 mm
Repetition rate
approx. 3 kHz
Wave length
680 nm
No-load supply current
< 20 mA at 24 V supply voltage
Compatible master port type
A
Response time
2.3 ms
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Adjustment range
20 ... 150 mm
Diameter of the light spot
approx. 2 mm at a distance of 150 mm
Interface type
IO-Link ( via C/Q = BK )
SIO mode support
yes
Communication interface
IEC 61131-9
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F) , fixed cable, -25 ... 60 °C (-13 ... 140 °F) , movable cable not appropriate for conveyor chains
Laser class
1
Beam divergence
> 5 mrad ; d63 < 1 mm in the range of 50 mm ... 250 mm
IO-Link revision
1.1
Switching type
The default setting is: C/Q - BK: NPN normally open, PNP normally closed, IO-Link, Q2 - WH: NPN normally open, PNP normally closed
Housing width
11 mm
Connection
2 m fixed cable
Detection range
8 ... 150 mm
max. pulse energy
15.2 nJ
Operating voltage
10 ... 30 V DC
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
Device ID
0x110802 (1116162)
Voltage drop
≤ 1.5 V DC
Housing
PC (Polycarbonate)
Signal output
2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
EAC conformity
TR CU 020/2011
Housing height
37.1 mm
Switching frequency
217 Hz
Mass
approx. 36 g

OQT150-R100-2EP-IO-L Related Documents