SLC440AS-ER-1770-30 Schmersal Safety Light Curtains

Product Details

• 7-segment display
  Yes
• Number of beams
  88
• Degree of protection
  IP67 to EN 60529
• Rated impulse withstand voltage Uimp
  0.8 kV
• AS-i Profile
  S-0.B.F.E
• Note (AS-i Parameter bits)
  Set the parameter outputs to "1111" (0xF), FID: periphery error
• Enclosure material
  Aluminium
• Reaction time, maximum
  23 ms
• Height of the protection field
  1,770 mm
• Terminal Connector
  Connector
• Terminal connector, Recipient
  Connector plug M12, 5-pole
• Height of the Sensor (Transmitter)
  1,883 mm
• Storage and transport temperature, maximum
  +70 °C
• Restistance to shock
  10 g / 16 ms
• AS-i Operating voltage, minimum
  18 VDC
• AS-i Current consumption, maximum
  50 mA
• AS-i Input, Channel 1
  Data bits DI 0 / DI 1 = dynamic code transmission
• AS-i Outputs, DO 0 … DO 3
  No Function
• AS-i Input module address
  0
• Note (AS-i Input module address)
  Preset to address 0, can be changed through AS-interface bus master or hand-held programming device
Hide function
Yes
Active principle
optoelectronic
Ambient temperature, minimum
-10 °C
Rated insulation voltage Ui
32 VDC
AS-i Version
V 3.0
Rated operating voltage
24 VDC -15% / +10% (stabilised PELV)
Standards
EN 50295, EN 62061, EN 61496-1
Range, protection field, minimum
300 mm
Height of Receiver
1,903 mm
Protection rating
III
Degree of pollution to VDE 0100
2
AS-i Input, Channel 2
Data bits DI 2 / DI 3 = dynamic code transmission
AS-i Parameter bits, P2
No function
Power consumption, Receiver
150 mA
Integral System Diagnostics, status
Yes
Range, protection field, maximum
10,000 mm
Terminal, Connector, Transmitter
Connector plug M12, 4-pole
Ambient temperature, maximum
+50 °C
Overvoltage category
III
AS-i Specification
Safety-Slave
AS-i Parameter bits, P0
No function
Safety functions
Yes
Detection ability for test bodies at v = 1.6 m/s
30 mm
Length of sensor
33 mm
Resistance to vibrations to EN 60068-2-6
10 … 55 Hz, amplitude 0.35 mm
Note (AS-i Operating voltage)
Protection against polarity reversal
AS-i Parameter bits, P3
Internal device error (FID)
Gross weight
2,930 g
Wave length of the sensor
880 nm
Width of sensor
27.8 mm
Storage and transport temperature, minimum
-25 °C
AS-i Operating voltage AS-i maximum
31.6 VDC
AS-i Parameter bits, P1
Low beam quality
Power consumption, Transmitter
75 mA

SLC440AS-ER-1770-30 Related Documents