SLC440AS-ER-1290-30 Schmersal Safety Light Curtains

Product Details

• 7-segment display
  Yes
• Gross weight
  2,230 g
• Height of the protection field
  1,290 mm
• Degree of protection
  IP67 to EN 60529
• Enclosure material
  Aluminium
• Number of beams
  64
• Storage and transport temperature, maximum
  +70 °C
• Degree of pollution to VDE 0100
  2
• AS-i Outputs, DO 0 … DO 3
  No Function
• Standards
  EN 50295, EN 62061, EN 61496-1
• Wave length of the sensor
  880 nm
• Width of sensor
  27.8 mm
• Ambient temperature, minimum
  -10 °C
• AS-i Current consumption, maximum
  50 mA
• Rated operating voltage
  24 VDC -15% / +10% (stabilised PELV)
• Hide function
  Yes
• Detection ability for test bodies at v = 1.6 m/s
  30 mm
• Height of transmitter
  1,403 mm
• Storage and transport temperature, minimum
  -25 °C
• AS-i Operating voltage, minimum
  18 VDC
AS-i Input, Channel 2
Data bits DI 2 / DI 3 = dynamic code transmission
AS-i Parameter bits, P2
No function
Safety functions
Yes
Terminal, Connector, Transmitter
Connector plug M12, 4-pole
Length of sensor
33 mm
Restistance to shock
10 g / 16 ms
AS-i Version
V 3.0
Note (AS-i Parameter bits)
Set the parameter outputs to "1111" (0xF), FID: periphery error
Reaction time, maximum
23 ms
Range, protection field, minimum
300 mm
Height of Receiver
1,423 mm
Resistance to vibrations to EN 60068-2-6
10 … 55 Hz, amplitude 0.35 mm
AS-i Operating voltage AS-i maximum
31.6 VDC
AS-i Parameter bits, P0
No function
AS-i Parameter bits, P3
Internal device error (FID)
Active principle
optoelectronic
Integral System Diagnostics, status
Yes
Range, protection field, maximum
10,000 mm
Overvoltage category
III
AS-i Input, Channel 1
Data bits DI 0 / DI 1 = dynamic code transmission
AS-i Input module address
0
Terminal connector, Recipient
Connector plug M12, 5-pole
Ambient temperature, maximum
+50 °C
Rated insulation voltage Ui
32 VDC
AS-i Specification
Safety-Slave
Note (AS-i Input module address)
Preset to address 0, can be changed through AS-interface bus master or hand-held programming device
Terminal Connector
Connector
Rated impulse withstand voltage Uimp
0.8 kV
AS-i Profile
S-0.B.F.E
Power consumption, Transmitter
75 mA
Protection rating
III
Note (AS-i Operating voltage)
Protection against polarity reversal
AS-i Parameter bits, P1
Low beam quality
Power consumption, Receiver
150 mA

SLC440AS-ER-1290-30 Related Documents