SLC440AS-ER-0970-14 Schmersal Safety Light Curtains

Product Details

• Reaction time, maximum
  23 ms
• Range, protection field, minimum
  300 mm
• Height of Receiver
  1,103 mm
• Ambient temperature, minimum
  -10 °C
• Overvoltage category
  III
• AS-i Input, Channel 1
  Data bits DI 0 / DI 1 = dynamic code transmission
• Power consumption, Receiver
  150 mA
• Enclosure material
  Aluminium
• Hide function
  Yes
• Height of the protection field
  970 mm
• Terminal connector, Recipient
  Connector plug M12, 5-pole
• Storage and transport temperature, minimum
  -25 °C
• Rated impulse withstand voltage Uimp
  0.8 kV
• AS-i Version
  V 3.0
• AS-i Input module address
  0
• Active principle
  optoelectronic
• Number of beams
  96
• Terminal, Connector, Transmitter
  Connector plug M12, 4-pole
• Ambient temperature, maximum
  +50 °C
• Rated insulation voltage Ui
  32 VDC
AS-i Specification
Safety-Slave
AS-i Parameter bits, P3
Internal device error (FID)
Standards
EN 50295, EN 62061, EN 61496-1
Detection ability for test bodies at v = 1.6 m/s
14 mm
Terminal Connector
Connector
Degree of protection
IP67 to EN 60529
Protection rating
III
AS-i Profile
S-0.B.F.E
Note (AS-i Parameter bits)
Set the parameter outputs to "1111" (0xF), FID: periphery error
Gross weight
1,730 g
7-segment display
Yes
Range, protection field, maximum
7,000 mm
Height of transmitter
1,083 mm
Storage and transport temperature, maximum
+70 °C
Degree of pollution to VDE 0100
2
AS-i Current consumption, maximum
50 mA
AS-i Parameter bits, P1
Low beam quality
AS-i Outputs, DO 0 … DO 3
No Function
Note (AS-i Input module address)
Preset to address 0, can be changed through AS-interface bus master or hand-held programming device
Power consumption, Transmitter
75 mA
Safety functions
Yes
Integral System Diagnostics, status
Yes
Wave length of the sensor
880 nm
Width of sensor
27.8 mm
Resistance to vibrations to EN 60068-2-6
10 … 55 Hz, amplitude 0.35 mm
AS-i Operating voltage AS-i maximum
31.6 VDC
AS-i Operating voltage, minimum
18 VDC
AS-i Parameter bits, P0
No function
Rated operating voltage
24 VDC -15% / +10% (stabilised PELV)
Length of sensor
33 mm
Restistance to shock
10 g / 16 ms
Note (AS-i Operating voltage)
Protection against polarity reversal
AS-i Input, Channel 2
Data bits DI 2 / DI 3 = dynamic code transmission
AS-i Parameter bits, P2
No function

SLC440AS-ER-0970-14 Related Documents