SLC440AS-ER-0410-30 Schmersal Safety Light Curtains

Product Details

• Safety functions
  Yes
• Enclosure material
  Aluminium
• Range, protection field, minimum
  300 mm
• Degree of protection
  IP67 to EN 60529
• Rated impulse withstand voltage Uimp
  0.8 kV
• AS-i Specification
  Safety-Slave
• AS-i Parameter bits, P3
  Internal device error (FID)
• Integral System Diagnostics, status
  Yes
• Detection ability for test bodies at v = 1.6 m/s
  30 mm
• Terminal, Connector, Transmitter
  Connector plug M12, 4-pole
• Storage and transport temperature, maximum
  +70 °C
• AS-i Current consumption, maximum
  50 mA
• AS-i Outputs, DO 0 … DO 3
  No Function
• Power consumption, Receiver
  150 mA
• Active principle
  optoelectronic
• Number of beams
  20
• Length of sensor
  33 mm
• Resistance to vibrations to EN 60068-2-6
  10 … 55 Hz, amplitude 0.35 mm
• AS-i Operating voltage, minimum
  18 VDC
• AS-i Parameter bits, P1
  Low beam quality
Note (AS-i Input module address)
Preset to address 0, can be changed through AS-interface bus master or hand-held programming device
7-segment display
Yes
Terminal connector, Recipient
Connector plug M12, 5-pole
Height of Receiver
543 mm
Ambient temperature, maximum
+50 °C
Note (AS-i Operating voltage)
Protection against polarity reversal
AS-i Input, Channel 1
Data bits DI 0 / DI 1 = dynamic code transmission
AS-i Input module address
0
Reaction time, maximum
13 ms
Range, protection field, maximum
10,000 mm
Ambient temperature, minimum
-10 °C
Protection rating
III
AS-i Version
V 3.0
AS-i Parameter bits, P2
No function
Gross weight
930 g
Wave length of the sensor
880 nm
Height of the Sensor (Transmitter)
523 mm
Rated insulation voltage Ui
32 VDC
AS-i Operating voltage AS-i maximum
31.6 VDC
AS-i Parameter bits, P0
No function
Rated operating voltage
24 VDC -15% / +10% (stabilised PELV)
Standards
EN 50295, EN 62061, EN 61496-1
Height of the protection field
410 mm
Storage and transport temperature, minimum
-25 °C
Overvoltage category
III
AS-i Profile
S-0.B.F.E
Note (AS-i Parameter bits)
Set the parameter outputs to "1111" (0xF), FID: periphery error
Hide function
Yes
Terminal Connector
Connector
Width of sensor
27.8 mm
Restistance to shock
10 g / 16 ms
Degree of pollution to VDE 0100
2
AS-i Input, Channel 2
Data bits DI 2 / DI 3 = dynamic code transmission
Power consumption, Transmitter
75 mA

SLC440AS-ER-0410-30 Related Documents