SLC440AS-ER-0170-30 Schmersal Safety Light Curtains

Product Details

• Safety functions
  Yes
• Terminal, Connector, Transmitter
  Connector plug M12, 4-pole
• Storage and transport temperature, minimum
  -25 °C
• Protection rating
  III
• Note (AS-i Operating voltage)
  Protection against polarity reversal
• AS-i Parameter bits, P0
  No function
• Note (AS-i Input module address)
  Preset to address 0, can be changed through AS-interface bus master or hand-held programming device
• Gross weight
  530 g
• Range, protection field, minimum
  300 mm
• Width of sensor
  27.8 mm
• Resistance to vibrations to EN 60068-2-6
  10 … 55 Hz, amplitude 0.35 mm
• Degree of pollution to VDE 0100
  2
• AS-i Profile
  S-0.B.F.E
• Note (AS-i Parameter bits)
  Set the parameter outputs to "1111" (0xF), FID: periphery error
• 7-segment display
  Yes
• Enclosure material
  Aluminium
• Wave length of the sensor
  880 nm
• Height of the Sensor (Transmitter)
  283 mm
• Overvoltage category
  III
• AS-i Current consumption, maximum
  50 mA
AS-i Parameter bits, P3
Internal device error (FID)
Hide function
Yes
Reaction time, maximum
13 ms
Height of Receiver
303 mm
Ambient temperature, maximum
+50 °C
AS-i Operating voltage, minimum
18 VDC
AS-i Outputs, DO 0 … DO 3
No Function
Power consumption, Transmitter
75 mA
Integral System Diagnostics, status
Yes
Height of the protection field
170 mm
Storage and transport temperature, maximum
+70 °C
AS-i Specification
Safety-Slave
AS-i Parameter bits, P1
Low beam quality
Rated operating voltage
24 VDC -15% / +10% (stabilised PELV)
Detection ability for test bodies at v = 1.6 m/s
30 mm
Length of sensor
33 mm
Ambient temperature, minimum
-10 °C
Rated insulation voltage Ui
32 VDC
AS-i Input, Channel 1
Data bits DI 0 / DI 1 = dynamic code transmission
Power consumption, Receiver
150 mA
Standards
EN 50295, EN 62061, EN 61496-1
Number of beams
8
Terminal connector, Recipient
Connector plug M12, 5-pole
Terminal Connector
Connector
Restistance to shock
10 g / 16 ms
AS-i Operating voltage AS-i maximum
31.6 VDC
AS-i Input, Channel 2
Data bits DI 2 / DI 3 = dynamic code transmission
AS-i Input module address
0
Active principle
optoelectronic
Range, protection field, maximum
10,000 mm
Degree of protection
IP67 to EN 60529
Rated impulse withstand voltage Uimp
0.8 kV
AS-i Version
V 3.0
AS-i Parameter bits, P2
No function

SLC440AS-ER-0170-30 Related Documents